Search results for: '0.5 05 0 5'

Wohler Stainless Steel Bristle Wire Star Brush — Precision Cleaning for Professionals!

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Used Sonatest PMAP505045, 5 MHz 0.5" 45° angle beam probe for weld inspection and flaw detection. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Eagle Eye IBEX-Series portable battery resistance tester measures battery health online with fast resistance, voltage, current, and temperature diagnostics.

The Amprobe MO-100 Milliohm Meter offers accurate four-terminal resistance measurement with auto-hold, overvoltage protection, and a portable battery-powered design.

Used Sonatest PIM5025, 2.25 MHz, 0.5" immersion ultrasonic transducer for flaw detection andprecision NDT in composites, metals, and ceramics. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70, and Prisma. Order from Cartoli or call 1-833-322-7865.

AEMC JM830A AC Current Probe — 3000A range, 0.333mA/A output, low phase shift, banana plug lead — Ideal for DMMs, power, and harmonic meters.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Digi-Pas DWL1300XY 2-axis smart machinist digital level delivers simultaneous X and Y leveling measurement with Bluetooth connectivity, 0° to ±5.00° range, 0.002 in/ft resolution, and precision setup support for machine alignment workflows.

Digi-Pas DWL1500XY 2-Axis Precision Digital Level brings simultaneous X-Y measurement, 0.0002"/ft resolution, and Bluetooth wireless readout to precision machine leveling, setup, and alignment workflows.

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

Complies with CE safety standard 3 1/2 digits 1999 counts Palm size for easy storage and carrying Digits 3 1/2 digits 1999 counts Accuracy 0.5% best accuracy DCV 2200m/2000m/20/200V ±(0.8%+3d), 500V ±(1.0%+3d) ACV 200/500V ±(1.2%+5d) DCA 2000u/20m/200mA ±(1.2%+5d), 10A ±(2.5%+5d) ACA 400μA/4000μA ±(1.5%+10d), 40mA/400mA ±(1.5%+10d), 10A ±(2.5%+15d) Resistance 200Ω ±(1.5%+5d) , 2000/20k/200kΩ ±(1.0%+3d) , 20MΩ ±(1.0%+5d), 200MΩ ±(1.0%(rdg-l0)+10d) Temperature -40~150˚C ±(1.0%+3d), 150-1000˚C ±(1.5%+15d)-40~302˚F(1.0%+4d), 302-1832˚F ±(1.5%+15d) Power source 1.5V AAA x 2 (not included) Accessories Test leads Square signal output 50Hz (5 Vp-p, 50KΩ)

AEMC MN72 Current Probe designed for Model 6424, enables accurate ground & bond testing with one-button operation, CAT IV 600V safety, and IP65 rating.

Fluke 80PK-8 Type K pipe clamp thermocouple probe for fast pipe-surface temperature readings on 1/4–1-3/8 in lines, with durable ribbon sensor and 40 in lead.

Allen-Bradley 1769-IF8 analog input module for CompactLogix systems, providing eight configurable voltage or current input channels for precise industrial signal monitoring and control.

AEMC L261 Simple Logger® II records 1-channel TRMS voltage up to 600VAC/DC with USB, DataView® software, and long battery life for flexible monitoring.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.