Search results for: 'amp a'

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

Leviton 165-4579-C delivers industrial-grade locking connector capability for 15 Amp, 250 Volt electrical connections with a 2-pole, 3-wire grounding configuration.

Amprobe AMP-220 Clamp Meter delivers accurate 600A AC/DC measurements with True-RMS, Amp-Tip, backlit display, and non-contact voltage detection.

Amprobe AMP-210 clamp meter measures AC current up to 600 A with True RMS accuracy, Amp-Tip low current precision, and CAT III 600 V safety.

AEMC Banana (Female) to BNC (Male) adapter XM-BB, rated 600V CAT III, compatible with AmpFlex sensors, Models K100/K110, and SLII Data Loggers.

The AMP 531-353-5 is a panel mount card edge connector from TE Connectivity AMP Connectors. It features six power positions arranged in two rows with female contacts and solder termination. The connector is designed for panel mounting and accepts 0.062 inch card thickness, using a glass-filled polyester housing.

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

Amprobe AMP-310 Clamp Meter: True-RMS HVAC and motor testing with inrush current, temperature, and 3-phase rotation features.

Amprobe AMP-320 clamp meter measures 600 A AC/DC with True RMS, temperature, motor rotation, inrush current, and HVAC-ready diagnostics.

Amprobe AMP-330 Clamp Meter: Accurate 1000A AC/DC, temperature, and flame sensor testing for motors, HVAC, and industrial electrical systems.

Wöhler Snap & Sweep Regular Cleaning Rod 1222 is a single 3 ft rod with snap-in quick connectors for extending a Snap & Sweep chimney and exhaust cleaning assembly.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

Amprobe ACD-14-PRO: TRMS clamp meter with dual backlit display, Amp-Tip precision, and low pass filter for HVAC and electrical diagnostics.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

Airpax UPL111-25620-1 is a 3-pole magnetic-hydraulic circuit breaker for panel-mounted power switching and circuit protection in commercial and industrial equipment.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

AEMC AmpFlex Rogowski coil current sensor with 24" flexible loop. Measures 30A and 300A AC with dual 100mV/A and 10mV/A output for use with DMMs, loggers, and scopes in compact spaces.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

AEMC AmpFlex Rogowski coil current sensor with a 36" flexible loop. Measures 100A and 1000A AC with dual 10mV/A and 1mV/A output. Ideal for tight, irregular spaces and large bus bars.

Amprobe RS-3 PRO: CAT IV 300A analog clamp meter for AC current, voltage, and resistance testing. Reliable, rugged, and battery-free for volts/amps.

Bussmann LPJ-30SP delivers 30A Class J circuit protection with LOW-PEAK dual-element time-delay performance, current limiting design, and 600VAC or less rating.