Search results for: 'margin 0'

New GE Kelman Transport X² portable dissolved-gas-analysis system for transformer oil. Configure your quote by selecting regional power cable, color, and optional accessories. 

Used Panametrics V406 5.0 MHz contact ultrasonic transducer with 0.50" element diameter. Designed for reliable flaw detection and precise thickness gauging. Fully tested, certified, and ready to support your inspection needs.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

The EXFO MaxTester 730C is a handheld singlemode OTDR configured for 1310 and 1550 nm fiber testing. This unit includes an installed PM-MAX-2X power meter hardware module and RF capability with Wi-Fi and Bluetooth for combined OTDR and power measurement.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

Used Waygate 57K0204P1 90° shear wave angle beam wedge engineered for precision ultrasonic testing with 0.50" transducers. Perfectly suited for high-accuracy weld inspections, pipe evaluation, and specialized material testing. Fully tested and ready to deploy.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

The INNO Instrument RS-PLUS Ribbon Splitter Tool is a compact, all-metal de-ribbonizer designed to separate multi-fiber ribbon cables into sub-groups or individual fibers. It supports 4, 8, and 12-fiber ribbons and enables controlled fiber preparation prior to splicing in fiber optic networks.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

AFL OFI-400 Fiber Identifier: Detects live fibers, directional traffic, and test tones with ease. Ergonomically designed for efficient, safe fiber identification.

GE Waygate XL Vu borescope configured as the D6130 6.1mm x 3M stereo measurement tips. Includes stereo measurement optical tips and calibration block, extending the system from visual inspection to dimensional inspection in a portable RVI platform.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

Cordless 36 V industrial torque multiplier in the HYTORC Lithium Series II family. Configure your quote by selecting LST-2000 / 3000 / 5000 model, reaction fixtures, tool hanger, battery kit, and optional 3-year extended calibration.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.