Search results for: 'margin model'

Cordless 36 V industrial torque multiplier in the HYTORC Lithium Series II family. Configure your quote by selecting LST-2000 / 3000 / 5000 model, reaction fixtures, tool hanger, battery kit, and optional 3-year extended calibration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

The INNO ICC-48 Backpack for Workstation is a dedicated carrying solution designed for INNO workstation systems. It supports transport and storage of compatible workstation components in field and ground-based working environments. Backpack only.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Used Panametrics V406 5.0 MHz contact ultrasonic transducer with 0.50" element diameter. Designed for reliable flaw detection and precise thickness gauging. Fully tested, certified, and ready to support your inspection needs.

The Thermo Scientific Niton XL2 Precious is a handheld X-ray fluorescence (XRF) analyzer designed for rapid, non-destructive analysis of precious metals. It supports purity verification and elemental composition analysis for jewelry, bullion, coins, and finished precious metal products.

VIAVI OneExpert ONX-630 CATV field analyzer with DOCSIS 3.1 support: Configuration includes Sweepless Sweep with SWX and TSX packages, enabling forward and reverse sweep testing, OFDM analysis, and bonded channel measurement for cable networks.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

The Thermo Scientific Niton XL2 100G is a handheld X-ray fluorescence (XRF) alloy analyzer designed for general metal identification and verification. It provides non-destructive elemental analysis for common industrial alloys in a portable, field-ready instrument.

Used Sonatest QCG5025 2.25 MHz shear wave angle beam ultrasonic transducer with 0.50" crystal diameter and Microdot quick change connector. Designed for precision flaw detection in welds and structural components. Fully tested and certified for immediate deployment.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

AFL SS03-compatible, CFS-3 equivalent single-fiber stripper for 2–3 mm jacket, 900 µm buffer, 250 µm coating, 125 µm cladding. New replacement tool with three-hole geometry; equivalent to OEMs, not the original brand.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.