Search results for: 'margin modes'

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

Thermo Scientific Niton XL2 800 handheld X-ray fluorescence analyzer for nondestructive metal analysis with General Metals and Precious Metals modes. Also includes Metals Pass/Fail and Spectral FingerPrint functions for alloy identification, precious-metal analysis, and material sorting workflows.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

INNO Instrument View 8X is a single-fiber core alignment fusion splicer kit for SM, MM, DS, and NZDS fibers. It features ultrafast splice/heating cycles, a 5.0” full-touch display, automatic arc calibration, and IoT/GPS functions for tracking and device management.

Radiodetection RD8200 G locator with integrated GPS, iLOC remote control, and paired TX-10B 10W transmitter for precise cable and pipe locating, current measurement, and survey-grade utility mapping.

The Thermo Scientific Niton XL2 is a handheld X-ray fluorescence (XRF) analyzer designed as a configurable platform for non-destructive elemental analysis. It supports alloy analysis, consumer goods screening, mining, and environmental applications depending on enabled detection modes.

Olympus Innov-X DELTA Classic DC-2000 handheld XRF analyzer with Alloy mode for non-destructive elemental analysis, alloy identification, and field-based material verification using portable X-ray fluorescence technology.

The INNO Instrument A3 is a clad alignment arc fusion splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fiber types. It features a 4.3-inch color LCD touch screen, active 4-motor alignment, and quick 7-second splice time in SM mode. This new kit configuration includes the V1 fiber cleaver and standard accessories for field deployment.

INNO Instrument M7+ compact fusion splicer kit with Active V-Groove cladding alignment and a 4.3" full-touch display. Supports single-fiber SM/MM/DS/NZDS splicing, quick splice/heating cycles, and data output via USB-C or View Pro Manager cloud.

The Thermo Scientific Niton XL2 Plus is a high-performance handheld X-ray fluorescence (XRF) analyzer designed as a fully configurable platform for non-destructive elemental analysis. It supports demanding industrial, environmental, and precious metals workflows through selectable detection modes.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

Fujikura 12S fusion splicer with CT-06 cleaver offers compact, rugged fixed V-groove single-fiber splicing, dual-camera alignment, 4.5" LCD, and long-life electrodes for reliable field fiber work.