Search results for: 'martin'

The Marlin 1200-J delivers a high-temp Type J male connector for reliable thermocouple connections, using glass-filled thermoset construction for extreme heat performance.

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

Used Panametrics V406 5.0 MHz contact ultrasonic transducer with 0.50" element diameter. Designed for reliable flaw detection and precise thickness gauging. Fully tested, certified, and ready to support your inspection needs.

Used Sonatest SSG62622 2.25 MHz 5/8" x 5/8" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity with 4.4" nearfield length. Fully tested and certified for dependable NDT performance.

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

3M Dynatel 1420-iD EMS Marker Locator kit with Keson PA14. The 1420-iD locates underground EMS markers, reads and writes 3M iD markers, estimates marker depth, and supports dual marker frequency search with RS232/USB PC interface.

Used Sonatest PSS50102W 2.25 MHz 1/2" x 1" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity and reliability. Fully tested and certified for precise NDT performance.

Brady WML-311-292 labels offer durable, self-laminating wire ID for 10–6 AWG wires, using B-292 vinyl for clear, long-lasting identification with Brady printers.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

Used GE 60 ALLUM 210-852-213 ultrasonic wedge for 60° shear wave inspection in aluminum. Precision engineered and fully compatible with GE MWB and Accuscan series transducers for reliable weld and flaw detection.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

Used GE 210-852-201 ultrasonic wedge engineered for 45° shear wave ultrasonic testing in aluminum. Precision manufactured and compatible with GE MWB and Accuscan transducers. Fully tested and certified for reliable flaw detection and weld inspection.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.