Search results for: 'peak ac'

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

Fluke 80K-40 high voltage AC/DC test probe extends multimeter measurement capability up to 40,000V peak for low-energy CAT I circuits, delivering accurate high-voltage readings with compatible Fluke meters.

Vishay 36MB100A single phase bridge rectifier supports 35 A average current and 1000 V VRRM in a compact D-34 package for general purpose and instrumentation power conversion.

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

Fluke 88-5 automotive meter delivers precise voltage, current, and pulse width diagnostics for modern and hybrid vehicles with advanced recording features.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Vishay 36MB100A single phase bridge rectifier delivers 35 A average output and 1000 V VRRM in a compact MB Series package for general purpose and instrumentation power conversion applications.

AEMC MTX 3290 Multimeter: Waterproof TRMS meter for measuring voltage, current, resistance, temp & more. Rugged IP67 body, CAT IV safety, and 6000-count LCD display.

Fluke 87V/E2 multimeter kit delivers precise True-RMS testing for industrial electricians, with VFD accuracy, peak capture, and essential accessories.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

AEMC 607 True-RMS Power Clamp-On Meter: Measures AC/DC volts, amps, power, harmonics & InRush with Bluetooth logging and CAT IV safety.

Fluke 87-5 CAL Industrial Multimeter: True RMS digital readings, fast peak capture, low-pass filter support, and backlit display for efficient troubleshooting.

The AEMC SR601 AC Current Probe delivers 1000 A AC current measurement with a 1000:1 ratio, 1 mA/A output, and 4 mm banana jack connection for DMMs, loggers, and compatible instruments.

AEMC 514 Clamp-On Meter delivers AC/DC current, TRMS, voltage, frequency, ohms, and continuity with a large, 4000-count display and 1-year warranty.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

The Fluke 87V multimeter delivers precision troubleshooting for VFDs, motor drives, and power systems with a low-pass filter, peak capture, and a backlit display.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.