Search results for: 'mounts'

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

The Phoenix Contact RAD-ISM-900-XD-BUS is an OMNEX industrial wireless transceiver module operating in the 900 MHz ISM band. It supports bidirectional wireless transmission of digital and analog I/O signals and mounts on a DIN rail with an integrated bus foot for I/O expansion.

Allen-Bradley 1746-A7 SLC 500 7-slot modular chassis supporting 1746 processors, I/O, and specialty modules. Designed for scalable PLC systems with side-mounted 1746 power supplies.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Allen Bradley 1734-MB provides reliable POINT I/O mounting w/ removable terminal block, DIN rail installation, and secure backplane connection for modular expansion.

The Yamatake Honeywell J-MBU00 is a modular base unit designed as a physical mounting and backplane chassis for compatible control or I/O modules. This unit provides slot-based connectivity within a larger industrial automation system. Delivered as the base unit only.

Allen-Bradley 1771-A3B1 PLC-5 12-slot I/O chassis provides reliable backplane communication and power distribution for 1771 modules in panel-mounted industrial control systems.

Allen-Bradley 1771-A1B/B is a 4-slot PLC-5 I/O chassis designed to house processors, power supplies, and 1771 I/O modules, providing reliable backplane connectivity for panel-mounted industrial control systems.

Allen-Bradley 1771-A2B PLC-5 8-slot I/O chassis provides a stable backplane platform for 1771 modules, supporting modular control system expansion with secure back-panel mounting.

The Honeywell C-HPE00 is a rack-mounted control system module used in Honeywell industrial automation environments. The unit consists of a metal card cage assembly with integrated backplane slots and an attached interface board. This listing includes only the hardware shown.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

The Honeywell 620-1690 is a processor rack chassis used in the legacy IPC 620 / ISSC 600 PLC system. It provides the physical backplane and power distribution framework for processor, I/O, and communication modules in rack-mounted industrial control installations.

Allen-Bradley 1794-TB3 FLEX I/O terminal base provides 16 I/O wiring points with screw-clamp connections, integrated FLEXBUS backplane support, and DIN-rail mounting for FLEX I/O systems.

Allen-Bradley 1771-A4B PLC-5 16-slot I/O chassis provides a backplane for mounting 1771 I/O modules, distributing 5V DC power, and supporting industrial PLC-5 control system expansion.

Phoenix Contact PLC-BSC-24UC/21-21 relay base for 24V AC/DC PLC relays, with LED status display and DIN rail mounting, ideal for automation control systems.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.