Search results for: 'compatible'

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Power Niton XL5, XL5 Plus, and XL5e handheld XRF analyzers with Thermo Scientific Battery PN 580-06811, a rechargeable Li-Ion pack built for compatible XL5-series field workflows and hot-swap operation.

The Inno Instrument USB-10P is a DC power cable featuring a USB Type-C connector on one end and a USB Type-A connector on the other. It is designed for powering and charging compatible Inno Instrument fiber optic equipment that utilizes a Type-C power input interface.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

AEMC 5000.57 Power Adapter 24VDC Charger: Reliable vehicle-use power adapter compatible with models 6470-B, 6471, and 6472 for seamless operation.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

Fluke BP7235 NiMH battery pack delivers reliable 7.2V power with 3500 mAh capacity, providing up to 16 hours of runtime for compatible Fluke calibrators.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

Wohler Car Charger for VIS 200, VIS 300, and VIS 400 cameras delivers vehicle-based charging in a compact, travel-ready format for dependable power on the go.

AEMC 2153.78 USB Wall Plug Adapter replacement for models L452, 1510, MH60 and compatible with multiple test equipment series.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

Keep a Wöhler 5502 Charger ready for dependable charging support with Wöhler A 450 and A 550 combustion analyzer workflows using a USB charger with Micro-USB cable.

Fisher TW9KTX-CHGR is a lithium-ion charger kit for the TW9000 transmitter. It charges TW9KTX-BATT batteries via an AC-powered cradle, ensuring reliable, field-ready operation.

AEMC 5100.15 Replacement 1000V PA32ER Power Supply for Model 8345, compatible with PowerPad IV 8345, 9000 Series Oscilloscopes, and C.A 6117.

Fluke Networks VERSIV-BATTERY: Reliable power for your DSX-5000 and OneTouch AT devices. Compact, efficient, and built to last—your go-to solution for seamless testing.

Fluke BP190 rechargeable NiMH battery pack delivers 7.2V power for ScopeMeter 190, 190C, and 430 Series instruments, providing reliable internal power with OEM-matched fit and capacity.

Symbol 50-14000-008R delivers reliable 5.2VDC power for Symbol/Motorola barcode scanners and cradles, providing a compatible replacement for discontinued OEM adapters.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.