Search results for: 'good d'

Application: Multi-Contact (MC3)∅3mm Solar Contacts Crimp Size: AWG 14/12/10 DIN 2.5/4.0/6.0mm

Application: Multi-Contact (MC4)∅4mm Solar Contacts

Fluke Networks 110 Punchdown Blade: EverSharp design for precise, durable terminations, fits D914S, D914, D814, and D214 punchdown tools.

Fluke Networks 10178600 EverSharp blade stays sharper longer for precise terminations. Fits D814, D914, and D914S impact tools.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

Fluke Networks EverSharp 110 Blade: Durable replacement blade for punchdown tools, designed to stay sharper longer and compatible with multiple block types.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks Pro-Tool Kit with D914S punchdown tool, D-Snips, and stripper for faster, cleaner terminations and reliable network installations.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.

EXFO MAX-720C-SM2-EA-RF is ready for fast 1310/1550/1625 nm SM fiber testing, pairing OTDR trace analysis with iOLM link mapping for access, FTTx/PON, LAN/WAN, and backhaul workflows.

AFL OFI-400 Fiber Identifier: Detect live fibers fast with 10,000+ tests. Rugged, lightweight, and perfect for seamless optical signal analysis!

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The Fujikura FID-30R Optical Fiber Identifier is designed for fast, non-intrusive identification of active optical fiber lines and features an integrated OPM. By clamping directly onto the fiber, it detects the presence or absence of traffic signals, tone signals, and ONU signals without interrupting service, making it ideal for fiber optic installation, maintenance, and troubleshooting. 

The EXFO FPM-602 is a handheld optical power meter built for fiber link qualification, loss testing, and troubleshooting across a wide range of network types. It uses a Ge detector with a 10 to -70 dBm power range and supports wavelengths from 800 to 1650 nm, making it suitable for common LAN, CWDM, DWDM, and FTTx test applications

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

The Fluke Networks 25501004 TS25D test set features a 346A plug, high-impedance monitor mode, caller-ID, polarity and voltage indication, tone/pulse dialing and a rugged field design. It is suited for installing and maintaining voice-grade telephone lines.

Fluke Networks D914 Impact Tool ensures precise network terminations with built-in hook, spudger, and ergonomic design for easy handling.