Search results for: 'controlled'

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

The INNO Instrument RS-PLUS Ribbon Splitter Tool is a compact, all-metal de-ribbonizer designed to separate multi-fiber ribbon cables into sub-groups or individual fibers. It supports 4, 8, and 12-fiber ribbons and enables controlled fiber preparation prior to splicing in fiber optic networks.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

Fluke singlemode 9 µm fiber optic cable delivers reliable OTDR connectivity with SC/SC connectors for precise network testing and diagnostics.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke Networks SRC-9-SCSC-KIT is a singlemode SC/SC test reference cord kit designed for accurate fiber testing with Fluke Networks testers. Includes four 2-meter SC-terminated reference cords.

Fluke Networks TRC-SM-VERIFY-MPO12P is a reference-grade single-mode MPO12 verification cord for CertiFiber Max systems, ensuring accurate reference validation for pinned MPO Type A fiber testing.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

The INNO Instrument E-70 fusion splicer electrodes are official replacement components designed for compatibility with INNO View Pro, Ribbon, and X Series splice machines. Rated for up to 5,500 splices per set, they support stable arc discharge performance and scheduled maintenance intervals.

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

Fluke Networks TRC-SM-VERIFY-MPO24P is a reference-grade single-mode MPO24 verification cord for CertiFiber Max optical loss testing, ensuring accurate reference validation with pinned MPO24 fiber links.

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.

Fluke Networks NFC-SWABS-1.25MM fiber optic cleaning swabs are designed for LC and MU ports, delivering precise 1.25mm bulkhead cleaning with lint-free material for effective wet or dry connector maintenance.

Fluke Networks MRC-625-EFC-SCLC-M TRC delivers 62.5 µm multimode EF-compliant testing with SC to metal LC connectors for precise optical loss measurements.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.