Search results for: 'integrity disc'

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

The INNO Instrument UN1COMT is a portable fiber splicing work tray with tripod designed for FTTH field operations. It provides a stable, elevated platform for securing fusion splicers and tools during ground-based or aerial work. The tray features integrated tool compartments and magnetic fixing points for organized equipment handling.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

The INNO Instrument VIEW 12R MAX is a 12-fiber ribbon fusion splicer using clad alignment technology and a 5.0-inch full-touch LCD interface. It supports 1–12 fiber splicing for SM, MM, DS, and NZDS fibers with integrated heater and included V12 cleaver kit.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

Single Fluke DTX-MFM2 multimode fiber module for 850/1300 nm dual-fiber loss and length testing. Supports SC output, interchangeable adapters, VFL, and FindFiber functions.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument VIEW 3X is an Active V-Groove Cladding Alignment Fusion Splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fibers. This standard OEM kit includes the V12 cleaver and integrated heater, with embedded IoT, GPS, and View Pro Manager cloud connectivity for project and device management.