Search results for: 'beeg,'

No exact results found for: 'beeg,'. The displayed items are the closest matches.

Category: Accessories

Clear All

Did you mean: been; best

Sensefly eBee VISION Charging Kit (Charger, Cable, and Adaptor)

Sensefly eBee VISION SmartCharger Kit (Charger, Cable and Adaptor)

Mastervolt Mass 24/100 (DNV GL) 40021006

MASTERVOLT MASS 24V /100A 3ph Mass battery charger

A MASTERVOLT MASS 24V 100A 3ph Mass battery charger is the perfect solution for charging your batteries quickly and easily. It is designed for the most difficult conditions with an MTBF of 180,000 hours at full capacity and 24/7 use.

JDSU FMAE Adapter FMAE-COD 21141630

OptiTap Simplex Plug AdapterFMAE Series adapters are used for patch cord inspection. They attach to the Patch Cord Microscope on theSmartClass Fiber Series, as well as the Fva Benchtop Microscope. They can also be connected to any VIAVI probe microscope by using the BFP-UFMAE, together with an FBP-BAP1 adapter. FMAE Series adapters are all female threaded.

Fluke Networks DSX-CHA003 Single DSX Series Coaxial Adapter Set

The DSX-CHA003 coaxial adapters are used in conjunction with the DSX CableAnalyzer to certify coaxial cabling for network and video applications. It supports testing of 50 ohm, 75 ohm, and 93-ohm coaxial cable and its Length-Scaled test limits which automatically adjusts the Insertion Lost limit across the specified frequency range.

Fluke Networks DSX-CHA004 set. Blue and white. DSXCHA004

Fluke Networks DSX-CHA004 Cat6A Channel Adapter Set For DSX-5000 DSX CHA004 5000

This set of Permanent Link Adapters from Fluke Networks comes with two tips, two latches, two screws, two top and bottom cases, and two conductive washers. The adapters meet all measurement accuracy specifications for Level IV test equipment, with a typical contact life of over 5,000 cycles. Each adapter measures 3.0 inches by 2.1 inches by 1.2 inches, has a 4.85-foot cable, and weighs approximately 2.4 ounces (channel adapter) or 11.7 ounces (permanent link adapter).

Fluke DSX CHA804 adapter. Its blue and yellow.

Fluke Networks DSX-CHA804 DSX-8000 Cat 8/Class I Channel Adapter Set

The DSX-PLA004/CHA004 permanent link and channel adapters meet all measurement accuracy specifications for Level IV test equipment. The life of module contacts is >5,000 cycles. Dimensions are 3.0 in x 2.1 in x 1.2 in (75 mm x 54 mm x 30 mm). The permanent link adapter has a 4.85 ft (1.48 m) ±0.25 ft (0.1 m) cable. Weight is ~2.4 oz (68 g) for the channel adapter and ~11.7 oz (332 g) for the permanent link adapter.

Fluke Networks DSX-CHA004 DSX-CHA004S Cat 6A Channel Adapter Set of 2

Fluke Networks DSX-PLA004 CAT 6A/CLASS EA Permanent Link Adapter

Product Description

SATO RH1730800 Cover Open Switch cable internal printer replacement part Product

SATO RH1730800 Cover Open Switch Cable Internal Printer Part

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

$11.00

Adam Equipment 700660288 Calibration Certificate

Adam Equipment 700400120 6VDC 200mA adapter

The Adam Equipment 6VDC 200mA adapter is designed specifically for CB scales, providing reliable power to ensure accurate weighing results. With this adapter, you can avoid the hassle and expense of replacing batteries, ensuring that your scale is always ready to use.

Special Price Regular Price

WOHLER AA Rechargeable NIMH Batteries Green (Set of 4) 2000 mAh for A400/A500

Special Price $48.70 Regular Price $51.00

Fluke T5 1000 Voltage Current Continuity Tester Kit with 1AC II Detector and Probes

Fluke T5-H5-1AC KIT/US Test Probe Kit Voltage Current Continuity

Fluke T5-H5-1AC Kit: Compact, versatile electrical tester for voltage, current, and continuity with OpenJaw™ and Slim Reach™ probes.

$276.99

Fluke 80BK A Type K Temperature Probe Product View

Fluke 80BK-A Type-K Temperature Probe for Digital Multimeters

Fluke 80BK-A is a Type-K thermocouple temperature probe designed for compatible digital multimeters, enabling accurate surface temperature measurements from −40°C to 260°C using standard shrouded banana inputs.

$73.99

Fluke BC430/830 AC Adapter 18V DC Output for Power Quality Analyzers

Fluke BC430/830 AC Adapter delivers efficient 18V DC power for 430-Series Analyzers and 120B ScopeMeters, ensuring fast, reliable charging.

$328.99

Fluke BC190 830 Universal Mains Power Adapter 18V DC

Fluke BC190/830 Universal Mains Power Adapter for 190-Series ScopeMeter

Fluke BC190/830 Power Adapter: Efficient 18V DC universal supply for Fluke 190-Series ScopeMeter, supports global voltage input and fast charging.

$223.99

Harold Beck & Sons 11-1373-01 7 Amp Fast-Acting DCM Fuse

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

$14.95

Fluke TP88 rigid back probe pin set with red and black insulated fine-tip probe pins for 2 mm test probes Product View

Fluke TP88 Rigid Back Probe Pin Set 2 mm

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

$45.99