Search results for: 'pins'

Fluke TP40 automotive back probe pins provide flexible 4mm banana jack connections for accessing sealed connectors. Designed for safe probing of fuel injectors, TPS, and MAP sensors up to 60 V DC.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

Pomona 5250 8-Pin SOIC test clip delivers hands-free, noise-free in-circuit testing of SOIC and SOJ chips. Gold-plated contacts ensure reliable connections on live boards.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona 3542-0 insulated panel mount pin tip jacks provide secure .080 pin connections for test and measurement panels. Gold-plated brass construction supports reliable signal access in compact panel installations.

The IFM Efector E18212 offers a durable 2 m PVC sensor cordset with a 1/2" 3-pin female connector, delivering reliable, sealed connections for industrial automation.

Fluke LEAD-PIRC-PIN test leads with piercing pin clips enable secure, accurate connections for Fluke Networks test sets with dust protection design.

Fluke TL82 adapter set provides secure pin and socket connections for automotive testing, supporting voltage, frequency, duty cycle, and resistance checks.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

Fluke Networks P3080001 line cord features piercing pin clips for testing insulated telephone wires with TS30 and TS120 test sets.

Fluke Networks P3218028 line cord with angled piercing pin clips enables testing of insulated telephone wires with compatible TS series test sets.

Fluke Networks LEAD-ABN-PPIN test leads feature durable braided cables, angled bed-of-nails, and piercing pin clips for reliable telecom testing.

Replacement USB cable (Type A to 5-pin Mini-B) for AEMC Simple Logger® II Series and Models DL-1080 and DL-1081. RoHS compliant.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

Fluke Networks LEAD-ABNP-100 test lead features angled bed-of-nails and piercing pin clips for secure, durable connections with TS100 and TS100 Pro.

Fluke Networks P3080009 line cord provides angled bed-of-nails and piercing pin clips for TS30 and TS120 test sets, enabling safe, durable insulated wire testing.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

Fluke Networks USB Interface Cable ensures fast, reliable data transfer between USB-A and Micro-B devices with durable copper conductors.

Fluke AC120 Alligator Clips: Safety-insulated probe tip clips compatible with STL120 and TL75 test leads for secure electrical testing.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

Fluke 80PK-1 Type K beaded thermocouple probe delivers fast-response air and surface temperature measurement using a miniature connector. Designed for general-purpose diagnostics with compatible Type K instruments.