Search results for: 'tipycall'

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

AEMC MiniFlex® MA193-14-BK — Flexible Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series, Includes a 2.75” clamp

AEMC MiniFlex® MA196-14-BK IP67 — Flexible, Waterproof Current Sensor, Measures up to 3000AAC, Designed for Models 8436, PEL 105 & 115. Special order only.

AEMC AmpFlex 196A-24-BK waterproof IP67 sensor measures up to 10,000AAC. Compatible with Models 8435, 8436, PEL 105 & 115.

The AEMC AmpFlex 193-36-BK flexible sensor measures up to 12,000AAC safely and is compatible with AEMC Models 3945, 8220, 8230, and PEL Series products.

AEMC MiniFlex® MA194-24-BK — Flexible Waterproof Current Sensor, Measures up to 3000AAC, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series. Replaces Cat #2140.78.

AEMC MiniFlex® MA193-10-BK — Flexible Current Sensor, Measures up to 3000AAC, Includes a compact 2.75” clamp, Compatible with AEMC Models 3945-B, 8220, 8230, and PEL Series products.

Schneider Electric APC SMT1000C 1000VA/700W line-interactive UPS with sine-wave output, SmartConnect cloud monitoring, LCD interface, automatic voltage regulation, and 8 NEMA 5-15R outlets.

AEMC MA114 MiniFlex® 14" Rogowski Coil — Flexible AC Current Sensor for Tight Spaces, Measures Up to 3000A, CAT IV 600V Rated

Philips Advance ICN-2P32-N Centium ballast delivers quiet, energy-efficient instant start operation for 1 or 2 F32T8 lamps in 120–277V commercial fixtures.

The Allen-Bradley 800B-ALB5 is a yellow, square lens cap with diffuser designed for Bulletin 800B 16 mm operator devices. It provides consistent color indication for push buttons and pilot lights in compact control panels and instrumentation applications.

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

GAI-Tronics 12511-001 is a dynamic noise-canceling transmitter replacement kit for compatible handsets in industrial paging systems. The kit includes the transmitter element and replacement cap and is identified as a replacement for legacy part 12511-007.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

The Bently Nevada 02003984 is a cable extension assembly designed for use within Bently Nevada proximity measurement systems. This assembly provides an intermediate electrical connection between system components using a factory-terminated cable with integrated connectors.

Fluke Networks CAT 8 adapter kit replaces worn plug tips, springs, and washers for DSX testers, ensuring long life and accurate cable certification.

Fluke SOL-TRNG-SPEC PVA Specialist Training is a live virtual class covering I-V curve tracing, Solmetric PV Analyzer operation, data management, deviation analysis, reporting, and acceptance testing for PVA-1500 Series users.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Pomona 4408 test lead holder provides durable steel organization for RG 59 and RG 108 cables. Designed for lab and bench use, it keeps test leads secure, visible, and easily accessible.

Pomona 5907A IEC 1010 DMM test lead kit delivers flexible, silicone-insulated 4 mm sheathed banana connections for Category III multimeter measurements with reliable contact and high safety compliance.

Fluke BP7235 NiMH battery pack delivers reliable 7.2V power with 3500 mAh capacity, providing up to 16 hours of runtime for compatible Fluke calibrators.