Search results for: 'controlled'

Pomona 5144-48-0 SMD Microtip Test Probe delivers precise probing of surface-mount contacts using a flexible stainless steel microtip and 48-inch lead with stacking banana plug for reliable electronics testing.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

AEMC 5000.91 Fuse Set of 5 UL rated 0.63A fuses, 6x32mm size, designed for fused leads ensuring reliable circuit protection.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

AEMC 2119.56 Fuse Set: 0.1A, 660V slow-blow protection for Models 1050, 1060, 6550, and 6555. High interrupting rating, durable build.

Bussmann LPJ-15SP time-delay fuse delivers 15A circuit protection with dual-element response and current-limiting performance for industrial electrical systems up to 600VAC.

The Fluke AC280 SureGrip™ Hook Clips are a pair of nickel-plated electrical test clips designed for secure, hands-free measurements. Featuring a narrowing profile and controlled hook opening, they support precise connections and are rated up to CAT III 1000 V.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Pomona 2305 low thermal EMF spade lug set minimizes thermoelectric effects with gold-plated tellurium copper for precise low-voltage measurements.

Fluke Networks FI1000-MPO-UTIP probe tip enables precise MPO/MTP UPC fiber inspection on FI-1000 probes, ideal for patch cord and bulkhead connector analysis.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

Eaton Bussmann 2432B59 semiconductor fuse delivers 10A, 250V high-speed protection for sensitive power electronics with a ceramic body and 200,000A interrupting rating in a pack of 10.

Fluke TL82 adapter set provides secure pin and socket connections for automotive testing, supporting voltage, frequency, duty cycle, and resistance checks.

Bussmann FRS-R-35 fuse delivers reliable 35A time-delay protection for motors and panels, using Class RK5 performance for safe, efficient industrial circuit protection.

General Electric RTN1S provides reliable 14.5–18A motor overload protection for GE CL02-45 starters, offering a durable thermal heater element for industrial control.

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

Pomona 6733-0 bare wire control cable features flexible silicone insulation, high strand copper conductor, and CAT III–compliant performance when properly terminated.

Eaton FG51-220 coil and feeder group restores reliable operation in GH-series modular contactors, offering a precise 240V replacement for maintenance and repair needs.