Search results for: 'insulated'

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

Fluke TL1500DC test leads provide safe, accurate voltage measurements up to 1500 V DC, ideal for multimeters, clamp meters, and solar/battery testing.

Fluke AC120 Alligator Clips: Safety-insulated probe tip clips compatible with STL120 and TL75 test leads for secure electrical testing.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

AEMC 2152.10 Utility Test Lead Kit #1 provides 1000V CAT IV-rated electrical testing capability with silicone-insulated safety leads, screw-on measurement accessories, and secure right-angle banana jack connections for demanding field and maintenance applications.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Fluke TL81A test lead kit: versatile multimeter accessory set with probes, clips, and extenders for reliable, safe electronic testing.

AEMC 2152.15 Safety Test Lead Set delivers reliable electrical test connections with 5 ft silicone insulated leads, color-coded red and black conductors, 4 mm right-angle and straight screw-on banana plugs, and a 1000V CAT IV safety rating.

AEMC 2152.13 Utility Test Lead Kit #4 supports safe electrical test connections with 5 ft silicone leads, screw-on alligator clips, grip probes, and CAT IV safety ratings.

AEMC 2152.12 Utility Test Lead Kit #3 delivers CAT-rated electrical test lead capability with silicone-insulated leads, screw-on probes, clips, grip probes, and spaded lugs for general electrical testing.

Pomona 5898 extra durable DMM test lead set with stainless steel probe tips, 4mm shrouded banana plugs, silicone-insulated leads, and CAT III 1000V rating for precise, reliable multimeter measurements.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Fluke TL935 Patch Cord Kit includes durable red and black 4 mm banana plug leads in 3 lengths for safe, flexible electrical testing and reliable connections.

AEMC 2152.14 Utility Test Lead Kit #5 brings rugged 5 ft silicone safety leads together with screw-on clips, pencil probes, and grip probes for CAT IV electrical test connections.

Eagle Eye IBEX 4-Point Test Leads for battery analyzers provide four-contact measurement for battery resistance and voltage testing with compatible IBEX systems.

AEMC 2151.33 5kV Safety Test Lead Set provides three color-coded 45 ft leads with integral clips for insulation resistance testing applications using compatible AEMC megohmmeters.

Fluke Networks LEAD-ALIG-CLP test leads feature durable braided cables and booted alligator clips for safe, reliable connectivity with compatible Fluke telephone test sets.

The AEMC 2131.35 Replacement Safety Lead provides a 6 ft connection with 4 mm female-to-female terminations for decade box applications. Designed for reliable electrical test setups and measurement system connectivity.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona 5144-48-0 SMD Microtip Test Probe delivers precise probing of surface-mount contacts using a flexible stainless steel microtip and 48-inch lead with stacking banana plug for reliable electronics testing.