Search results for: 'fusion use'

INNO Instrument FH-SOC fusion splicer SOC holder for use with compatible INNO Instrument fusion splicers, including View 12R, View 12R PRO, View 3 PRO, and M Series.

INNO Instrument FH-Single Fusion Series fiber holder for 900 µm single fiber in detachable M Series fusion splicer applications.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

INNO Instrument FH-12F Fiber Series ribbon fiber holder for 12-fiber flat ribbon cable, supporting 200 µm and 250 µm coatings and compatible with View12R, View12R-200, and View12R PRO detachable setups.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.