Search results for: 'integrity'

Olympus AM4R-20X22-70 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—designed for high-resolution weld inspection and flaw detection.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Certified pre-owned Sonatest PE-5.0M32E0.8P 5 MHz 32-element 0.8 mm pitch linear phased array ultrasonic probe. Delivers high-resolution imaging and dependable flaw detection for welds, pipelines, composites, and pressure vessels.

Certified pre-owned Sonatest PFC3725, 2.25 MHz 3/8" highly damped fingertip compression wave transducer—precision flaw detection and thickness measurement for confined or limited-access areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest FCG5050 5 MHz fingertip contact compression wave transducer with Microdot connector—designed for precision flaw detection in castings, forgings, and thickness surveys. Compatible with popular Sonatest flaw detectors.

Certified pre-owned Sonatest PE-7.5M44E0.6P 7.5 MHz 44-element 0.6 mm pitch linear phased array ultrasonic probe. Delivers precise flaw detection and high-resolution imaging for challenging welds, pipes, and composites.

Certified pre-owned Sonatest T1-25.4T426D 1 MHz 25.4 mm twin compression membrane transducer with top exit Microdot. Ideal for high-penetration flaw detection and corrosion mapping.

Certified pre-owned Sonatest T1-35W0D 1 MHz 35 mm twin compression membrane transducer with Microdot connector—ideal for high-penetration flaw and corrosion detection in castings, forgings, and composite parts.

Certified pre-owned Sonatest QCG2525 2.25 MHz 1/4" single crystal angle beam shear wave quick change ultrasonic transducer with Microdot connector. Designed for weld, forging, and pipe flaw inspection. Compatible with Sonatest and other flaw detectors.

Used Sonatest SA372525RL, 2.25 MHz 0.375" 25° shear wave angle beam probe for weld inspection, flaw detection, and code-compliant testing. Compatible with Sonatest Wave, Sitescan D-50, and Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Used Waygate Technologies Gamma 5.0/50 5.0 MHz 0.50" straight beam ultrasonic transducer featuring a side-mounted Microdot connector. Designed for precise flaw detection and material inspection on thick plates, forgings, and castings. Fully tested and certified for reliable NDT performance.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Olympus AM1R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Certified pre-owned Sonatest MAP252545T phased array mapping ultrasonic probe—estimated 2.5–5 MHz frequency range, 25 mm aperture, top exit configuration. Delivers rapid area mapping for corrosion, weld, or composite inspection. Compatible with Sonatest Veo3, Prisma, and mapping scanners.

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

Milltronics LR-21FM Ultrasonic Transducer delivers 21 kHz ultrasonic measurement capability with 3W output for reliable signal transmission across 5-meter applications.

Olympus AM4R-20X22-60 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector. Designed for high-resolution weld inspection and flaw detection in demanding NDT applications.

Olympus AM2R-20X22-70 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for weld and flaw inspection in heavy industry.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.