Search results for: 'system'

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Allen-Bradley 1492-CB1-H100 is a 10A single-pole thermal-magnetic supplementary circuit breaker for control circuits, featuring H-trip protection for highly inductive loads and DIN rail mounting.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

Allen-Bradley 800H-JP2KB7AAXX hazardous location selector switch from Bulletin 800H. This is a 3-position, non-illuminated, maintained standard knob operator with KB7 standard cam and AAXX contact block configuration.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Allen-Bradley 1492-UF824 fusible terminal block provides compact DIN-rail circuit protection with LED blown-fuse indication for low-voltage AC/DC control and PLC applications.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Allen-Bradley 140M-C2E-C20 motor protection circuit breaker delivers adjustable 14.5–20A thermal overload and fixed magnetic short-circuit protection for three-phase motors in IEC and UL applications.

Eaton E30KLA1 delivers reliable 1NO switching for E30 pushbuttons, featuring silver contacts and durable construction for industrial control applications.

Hubbell HBL2731 delivers a durable 30A 480V L16-30P twist-lock connection for industrial 3-phase equipment, ensuring secure, reliable power performance.

The Marlin 1200-J delivers a high-temp Type J male connector for reliable thermocouple connections, using glass-filled thermoset construction for extreme heat performance.

Phoenix Contact 2832771-HW15 FL Switch SF 8TX delivers reliable 8-port industrial Ethernet expansion with 10/100 Mbps speeds and DIN-rail mounting for automation networks.

Allen-Bradley 700-K40E-* Series B control relay brings compact 4-pole NO switching for industrial control circuits, with IEC-rated performance up to AC-12 690V 10A and clearly marked screw-terminal connectivity.