Search results for: 'through'

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

Siemens 75D70550004 magnetic coil supports D.P. Model F contactor replacement with dual-voltage operation at 380–440V 50 Hz and 440–480V 60 Hz.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Philips 3534B5A0460A110A3 aluminum electrolytic capacitor offers 460–553 MFD capacitance with a 110–125 VAC, 50/60 Hz rating in a cylindrical can format for component replacement and parts matching.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Introducing the OWON ODP3032: Precision Power Control Redefined.

Introducing the OWON ODP3031: Precision Power Control, Redefined.

Introducing the OWON ODP6033: Precision Power for Your Demanding Applications.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Hubbell 0740-113-33 delivers straight liquidtight cord-grip strain relief for insulated cables, combining stainless steel mesh, nylon body construction, and a neoprene bushing for dependable cable management.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Square D 83713 9070EO2D1 delivers open-type control circuit transformer operation with multi-tap primary input, 110/115/120 V secondary output, and 50/60 Hz ratings for industrial control panels.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.