Search results for: 'product'

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Marel MWS 4 Weight Control Module for industrial weighing systems, with CAN network labeling, dual RS232 ports, multiple sensor terminals, and four load cell connections in a compact panel-mount format.

Eaton 6-22-2 restores performance in Citation Series Size 0 contactors with OEM 3-pole replacement contacts for reliable motor control and long-term durability.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

Eaton PKZM0-10 motor-protective circuit breaker delivers adjustable 6.3-10 A motor protection, phase-failure sensitivity, and 4 kW performance at 380/400 V AC-3e in a compact three-pole design.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Square D 8501RSD14V51 miniature relay with 12 VDC coil, 4PDT contact composition, socket mounting, spade pins, and 5 A rating. Product range 8501R.

Hubbell HBL2431 delivers a compact locking plug format for 20A, 3-phase 480VAC connections with 3-pole, 4-wire grounding configuration.

Square D 9999 LL0 is a lug-lug kit for Type S contactor and starter configurations, supporting NEMA sizes 00, 0, and 1 in Class 9999 Type LL0 applications.

Siemens 75D70550004 magnetic coil supports D.P. Model F contactor replacement with dual-voltage operation at 380–440V 50 Hz and 440–480V 60 Hz.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

Steel City RSL 8 raised device cover provides a durable, galvanized 4-11/16" square solution for mounting two duplex receptacles in commercial installations.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The Eaton FAZ-C20/3 is a 20 A, three-pole miniature circuit breaker from the Moeller xEffect FAZ series. It features a C tripping characteristic and is rated for 240 V AC / 415 V AC applications. Designed for industrial and advanced commercial switchgear, it mounts on a 35 mm top-hat rail in accordance with IEC/EN 60715 and supports modular installation with a width of three modules.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

Burndy YA25 502215 HYLUG compression lug supports 1/0 AWG copper conductors with a one-hole long-barrel design and 5/16 in stud size for secure electrical terminations.

The TELEMECANIQUE LA4DC1U is a suppressor module designed for use with 3P LP1D09 to LP1D32 contactors. It provides flywheel diode suppression for DC control circuits rated from 24 to 250 V DC and mounts by screws for secure installation.