Search results for: 'panel'

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

Allen-Bradley 700-C1 rear deck contact cartridge delivers reliable switching functionality for Bulletin 700 relay systems, supporting consistent electrical contact operation in control circuit configurations.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Omron PTF08A-E is an 8-pin relay socket designed for use with Omron LY series SPDT and DPDT general-purpose relays. It supports DIN rail mounting and can also be screw-mounted. The socket features touch-safe screw terminals and is constructed for secure relay retention and field wiring integration in industrial control panels.

GE Power 730157 DILOS 2-160 delivers 4-pole manual switch disconnection with 160A Ith and 690V Ui markings for electrical control and isolation setups.

Omega CN9111A temperature controller delivers precise thermal regulation with dual relay outputs and 115V operation, supporting controlled heating and cooling processes across industrial environments.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Square D 9999 LL0 is a lug-lug kit for Type S contactor and starter configurations, supporting NEMA sizes 00, 0, and 1 in Class 9999 Type LL0 applications.

The TELEMECANIQUE LA4DC1U is a suppressor module designed for use with 3P LP1D09 to LP1D32 contactors. It provides flywheel diode suppression for DC control circuits rated from 24 to 250 V DC and mounts by screws for secure installation.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Allen-Bradley 100-C12D10 IEC magnetic contactor delivers reliable 12A motor control with 3-pole switching and integrated auxiliary contact, supporting 110V/120V coil operation for industrial control systems.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.