Search results for: 'application in'

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

General Electric 546A301G053 contact kit delivers 4-pole renewal capability for NEMA Size 1 magnetic contactors, supporting reliable electrical continuity and restoration of control equipment performance.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.