Search results for: 'mounted'

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Omron PTF08A-E is an 8-pin relay socket designed for use with Omron LY series SPDT and DPDT general-purpose relays. It supports DIN rail mounting and can also be screw-mounted. The socket features touch-safe screw terminals and is constructed for secure relay retention and field wiring integration in industrial control panels.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

Square D 9001 TS-1 selector switch operator delivers 2-position manual control for industrial panel systems requiring reliable mechanical switching input.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Allen-Bradley 800H-JP2KB7AAXX hazardous location selector switch from Bulletin 800H. This is a 3-position, non-illuminated, maintained standard knob operator with KB7 standard cam and AAXX contact block configuration.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.

Allen-Bradley 100-D-S1-11 auxiliary contact block adds 1NO/1NC control contacts to 100-D series contactors, offering reliable screw-terminal expansion for industrial panels.

Marel MWS 4 Weight Control Module for industrial weighing systems, with CAN network labeling, dual RS232 ports, multiple sensor terminals, and four load cell connections in a compact panel-mount format.

Lithonia Lighting 563-252 delivers NEMA twist-lock photo control functionality for compatible TF, TFH, TFD, TFG, or TFL fixtures equipped with a PER receptacle.

IPC 005-4240 power resistor delivers 110 ohm resistance with 800W heat dissipation for dynamic braking, load testing, and industrial energy control applications.

Hubbell HC69476733 industrial resistor assembly delivers controlled resistive load handling for power dissipation and current regulation in industrial electrical systems.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

Omega CN9111A temperature controller delivers precise thermal regulation with dual relay outputs and 115V operation, supporting controlled heating and cooling processes across industrial environments.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.