Search results for: '1.5'

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Digi-Pas DWL5000XY is a 2-axis precision tilt sensor module for real-time leveling, tilt angle, and vibration monitoring in machinery, equipment, and structural systems.

SKF TKSA 40 laser shaft alignment tool for horizontal single coupling alignment with soft foot check, alignment tolerance evaluation, internal result storage, and USB data transfer capability.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

96 pcs bits PH1,PH2 S2: PH0,PH1,PH2,PH3 M5,M6,M8 C1,C2,C3 S0,S1,S2,S3 4,6,8,10,12 1,2,3,4,5, 6,8,10 2mm,3mm,5mm PZ0,PZ1,PZ2,PZ3 2mm x 2mm x 2mm Wring nut driver 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" T5H, T6H, T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H T5, T6, T8, T10, T15, T20, T25, T27, T30, T40 1 pc sockets adapter 1 pc dry wall stopper 1 pc bits holder 1 pc magnetic bit holder

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

Fluke II915-SB140 package detects gas leaks, partial discharge, and vessel leakage using acoustic imaging and a 40 kHz sound beacon for fast pinpointing.

The Fluke 1630-2 FC is a high-performance ground-loop/leakage clamp meter that enables non-intrusive testing of bonded grounding systems — no auxiliary stakes needed — with wireless logging and rugged construction for industrial use.

Fluke T5-1000 tester measures voltage, continuity, and current up to 100 A with OpenJaw design and Slim Reach probes for tight spaces.

Honeywell BZ-2RS snap action switch delivers precise SPDT plunger actuation for industrial equipment, offering rugged performance and long operating life.

AEMC SR752 AC current probe, 1000A range, 1mV/A output, 52mm jaw, 5 ft lead. Ideal for DMMs, loggers, power meters with low phase shift and wide frequency range.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

CSI 2117A Vibration Analyzer: Compact, reliable tool for vibration monitoring. 10-hour battery, LCD display, and advanced fault detection for efficient diagnostics.

Application: BNC, TNC, Mini-UHF, RG58, 141, 142, 303, 400, 59, 62, 210 Belden 8279, 8281, 9231, 9141 RG-6, 212, 222, 304

NOYES OLS2 Dual SM Fiber Light Source: Dual wavelength 1310/1550nm, long battery life, rugged design. Ideal for fiber optic testing and certification. N.I.S.T. traceable.

AFL OFI-400 Fiber Identifier: Detects live fibers, directional traffic, and test tones with ease. Ergonomically designed for efficient, safe fiber identification.

Application: Red, Yellow, Blue Insulated terminals Nylon and Vinyl

Viavi OLS-36 Optical Light Source: Compact, quad-wavelength solution for accurate power and loss testing. 80h battery life for reliable field performance.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

The Fluke Networks TS52 PRO (52801004) brings the TS52 series reliability to a configuration with a 346A plug interface. It features a back-lit LCD, glow keypad, and DataSafe high-impedance monitoring—designed for line testing in telecom installations.

The Fluke Networks FI2-7000-MPO-NW is a non-wireless FiberInspector Ultra camera optimized for MPO-12/MPO-24 connectors. It provides automated IEC pass/fail analysis, high-resolution end-face imaging and fast inspection workflows for high-density fiber environments.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.