Search results for: 'panda with'

WOHLER 2494 Standard Clamping Cone secures 0.3-inch probes with stainless steel durability for stable, repeatable probe attachment in professional testing workflows.

The Fluke I17XX-FLEX3000/4PK includes four 24 in iFlex® flexible AC current probes rated to 3000 A AC. Designed for use with Fluke 17XX Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument and feature 1.8 m output cables for measurement flexibility.

Wöhler HBF 420 Moisture Meter delivers practical moisture assessment for wood and building materials using resistance and dielectric measurement for diagnostics, construction prep, and wood fuel checks.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Fluke I2500-18 flexible AC current probe enables accurate 2500A measurements with thin Rogowski coil design for tight spaces and hard-to-reach conductors.

Fluke 729 150G FC automatic pressure calibrator delivers hands-free pressure generation, HART communication, mA measurement, and Fluke Connect compatibility.

AEMC 2140.64 delivers a 10 ft, 4-lead color-coded replacement test lead set for AEMC 3945 and 3945-B power analyzers, with CAT IV-rated leads and alligator clips.

Introducing the WOHLER Extension Camera Cable with Distance Marking

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

Fluke FLK-A3000FC KIT Wireless Current Clamp Kit measures up to 400A AC with logging, inrush capture, and Fluke Connect wireless monitoring.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

The Fluke Networks FI2-7000-MPO-NW is a non-wireless FiberInspector Ultra camera optimized for MPO-12/MPO-24 connectors. It provides automated IEC pass/fail analysis, high-resolution end-face imaging and fast inspection workflows for high-density fiber environments.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

WOHLER GRP Rod Repair Kit 9mm for Large Viper supports rod-end replacement and maintenance for compatible Large Viper setups with a compact repair component and included Allen wrench.

Wöhler 1454 Brass Rod Connector with double-sided M10 thread provides a secure connection point for compatible rod-based inspection and cleaning system setups.

Hubbell 0740-113-33 delivers straight liquidtight cord-grip strain relief for insulated cables, combining stainless steel mesh, nylon body construction, and a neoprene bushing for dependable cable management.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

The Wöhler Mini Viper GRP Rod Repair Kit restores GRP rod readiness with the core replacement parts needed for rod-end repair and continued cleaning-system maintenance.

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.