Search results for: 'tet'

Moeller PKZM0-2.5 motor protection circuit breaker with attached NHI11-PKZ0 side module. Front rotary handle, 1.6-2.5 A adjustment dial, and three-pole terminal layout as shown.

Emerson KJ3204X1-BK1 is a DeltaV digital output module with 32 high-side 24 VDC channels for distributed control and automation I/O applications.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

The TRACO Power TSP 090-124EX is a 90 W DIN-rail mount industrial power supply providing 24 VDC at 3.75 A. It features universal 85–264 VAC input, adjustable 24–28 VDC output, DC-OK signal, remote On/Off control, and ATEX II3G certification for hazardous locations.

Allen-Bradley 800T-XA contact block delivers 1NO/1NC switching for 30.5 mm Bulletin 800T and 800H operators, providing dependable control panel signaling in modular industrial systems.

Allen-Bradley 2706-B21J16 DL20 two-line message display provides clear ASCII text output from a host controller using RS-232, RS-422, or parallel communication for industrial notification systems.

Fluke Networks FMC-1G enables 1 Gb/s fiber port testing with LinkIQ tools, providing SFPs, media converter, diagnostics, and a portable battery for field troubleshooting.

Fluke 750P08 pressure module converts your calibrator into a precision gauge pressure calibrator — 0-1000 psi range, digital output and high accuracy.

Fluke Networks FQM-M quickly locates bends, breaks, splices, and end-of-fiber distance on multimode links with fast 6-second testing and live fiber detection.

**Fluke 80PK-26 Type-K Temperature Probe** Experience precise temperature measurements with the Fluke 80PK-26 SureGrip Tapered Temperature Probe. Perfectly designed for technicians, this versatile probe excels in air and surface applications, featuring a tapered stainless-steel tip for easy insertion. With a broad measurement range of -40 to 816°C (-40 to 1500°F), it’s your go-to tool for demanding industrial, HVAC, and process environments. Enjoy secure handling with its SureGrip design, while ensuring compatibility with a variety of Fluke instruments. Elevate your measurement accuracy and productivity today!

Fluke 325 Clamp Meter: True RMS accuracy with AC/DC current to 400A, voltage to 600V, and temperature measurement—ideal for fast, reliable electrical troubleshooting.

Fluke LinkIQ tester verifies 10G cable performance, checks switch connectivity, and identifies copper/fiber faults with Wi-Fi, PoE, and fiber inspection tools.

Fluke Networks DSX2-8000-ADD-R kit expands DSX-8000 systems with Versiv 2 Remote, Cat 8 adapters, and accessories for complete copper certification.

Eaton MOD-ALG240 LED indicator module shows energized relay status for D3/D5/D7 series relays, offering clear visual monitoring and simple plug-in installation.

The WAGO 750-554 delivers precise 4–20 mA analog output for the WAGO 750 Series, providing isolated 12-bit current signals for industrial automation and control.

Bussmann FRS-R-35 fuse delivers reliable 35A time-delay protection for motors and panels, using Class RK5 performance for safe, efficient industrial circuit protection.

ETRI 148VK0282072 axial AC fan rated 115V AC, 50/60Hz, single-phase. Zamak housing with plastic impeller (UL 94 V0) and ball bearings. Thermally protected motor. 172 × 150 × 38 mm form factor with 305 mm leads (AWG20).

Fluke 190-062-III-S ScopeMeter: Rugged 60 MHz 2-channel oscilloscope with intelligent triggering, FFT analysis, and built-in multimeter.

The Fluke 1625-2 KIT is a full-featured ground/earth system tester kit offering all four measurement methods (3-/4-pole fall-of-potential, soil resistivity, selective, and stakeless), storing up to 1,500 records and included in a professional hard-kit format for power-utility, industrial and commissioning applications.

Introducing the **Fluke 719Pro 300G Electric Pressure Calibrator**, your essential tool for high-accuracy testing. Designed for technicians, engineers, and field calibrators, this rugged device enables precise calibration of transmitters, pressure switches, and gauges with unparalleled ease. Key features include an integrated electric pump for one-handed operation, exceptional 0.025% accuracy, and the ability to display multiple measurement parameters simultaneously. With versatile pressure ranges up to 300 psi, enhanced protective features, and user-friendly controls, the Fluke 719Pro 300G is perfect for reliable field performance. Included accessories ensure you’re ready for any calibration task. Get superior precision and efficiency for your calibration needs today! **Price:** $4,079.37 **Availability:** In Stock **Estimated Delivery:** 2-4 weeks **Model:** FLUKE-719PRO-300G **Condition:** New

Fluke DSX2-5000 CableAnalyzer – Certifies Cat 5e, 6, 6A, and Class EA copper cabling up to 1 GHz with Level V accuracy. Built on the Versiv™ platform for fast, standards-compliant network certification and LinkWare™ Live reporting.