Search results for: 'Instade'

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

The Fluke 700PTP-1 is a pneumatic test and vacuum pump designed to generate pressure up to 600 psi (40 bar) and vacuum down to -13 psi (-0.9 bar). It features adjustable stroke control, a vernier for fine pressure adjustment, and dual 1/4 in NPT female ports for simultaneous connection to a reference gauge and device under test.

Fluke I17XX-FLEX6000/3PK iFlex flexible current clamp kit includes three 36 in flexible Rogowski-style probes rated to 6000 A AC. Designed to connect directly to Fluke 173X Energy or Power Loggers, the probes provide expanded AC current measurement capability without external scaling factors.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

Fluke 62 MAX CAL infrared thermometer delivers non-contact temperature measurement with a 10:1 distance-to-spot ratio, IP54 protection, single-laser targeting, and traceable calibration data for dependable industrial diagnostics.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

Amprobe LM-200LED LED Light Meter delivers accurate lux and foot-candle measurements using a remote cosine-corrected sensor. Designed for professional LED and visible light evaluation.

Fluke Networks NFA-CFM-LC Duplex LC Input Adapter enables accurate power and loss testing with CertiFiber Max OLTS, providing a field-replaceable LC interface that protects the test port during duplex fiber measurements.

Fluke 301D-R AC/DC Clamp Meter delivers up to 600A current measurement in a slim, handheld design with a thin 10 mm jaw, backlit display, and essential electrical test functions for tight spaces.

Pomona 1756-24 Shielded Low Voltage Spade Lug Patch Cord supports precision microvolt and nanovolt measurements using gold-plated ETP copper spade lugs and a shielded 24-inch cable to minimize thermal EMF and signal interference.

Pomona 3789 BNC Male to Minigrabber Test Clip breakout cable enables fast, reliable signal access from BNC jacks to minigrabber clips for precise electronic testing and troubleshooting.

Pomona 3788 BNC Female to Minigrabber Test Clip Breakout enables fast signal access from BNC male cables to dual minigrabber clips, delivering secure low-resistance connections for electronic testing and diagnostics.

Fluke 1535 Insulation Resistance Tester delivers 250V–2500V testing with insulation measurements up to 500 GΩ. Designed for industrial and solar environments with CAT IV 600V safety and automatic PI/DAR calculations.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

Amprobe UAT-620 Underground Locator enables safe CAT IV 600 V tracing of energized and de-energized utilities with depth measurement up to 20 ft.

Fluke 787B ProcessMeter combines a safety-rated digital multimeter with mA loop calibrator functions, enabling accurate measurement, sourcing, and simulation for industrial current loop troubleshooting.

Fluke 754 Documenting Process Calibrator combines HART communication, sourcing, measurement, and automated documentation for complete process calibration.

Fluke PVA-1500 PV Analyzer measures high-efficiency solar modules with fast 1500V, 30A I-V curve tracing and includes 3 years of Fluke Premium Care.

Fluke 717 1000G Pressure Calibrator delivers 0–1000 PSI measurement with 0.05% accuracy and mA measurement for precise pressure calibration tasks.

Fluke ii905 Acoustic Imager detects and quantifies gas and vacuum leaks up to 70 m with LeakQ leak rate and cost estimation plus Wi-Fi sharing.

Fluke 1555 FC insulation tester delivers up to 10 kV testing with Fluke Connect remote operation, PI/DAR calculations, and CAT IV safety ratings.