Search results for: 'compatible'

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

Emerson Fisher 38B6041X152 I/P Assembly Shroud Kit for FIELDVUE DVC6000 digital valve controllers, converting 4–20 mA control signals into proportional pneumatic output for accurate valve positioning.

The Wohler Stabilization Sleeve M10 Thread delivers a secure threaded connection for connecting rods and P&T camera heads, helping maintain stable positioning and dependable integration during inspection workflows.

Certified pre-owned Sonatest ASM-9038-IX Type 1 DAAH adaptor for phased array systems. Features single socket and precision I-PEX connector for secure, low-noise connectivity between DAAH probe heads and Sonatest flaw detectors.

Certified pre-owned Sonatest T1-25.4T6"D 1 MHz 1" twin compression membrane ultrasonic transducer with top-exit Microdot connector. Designed for deep flaw detection and large-area NDT assessments.

Certified pre-owned Sonatest Q-Scan-1 5 MHz ultrasonic probe, 0.35" x 0.410" element, right/left encoder configuration—engineered for advanced flaw detection and thickness scanning with leading Sonatest phased array systems.

The Sonatest SLM1050 is a 5 MHz, 1" medium damped ultrasonic transducer for reliable NDT flaw detection and thickness measurement. Ideal for use on composites and metals. Compatible with Sitescan, Wave, and more. Shop now for proven performance.

AEMC 2152.15 Safety Test Lead Set delivers reliable electrical test connections with 5 ft silicone insulated leads, color-coded red and black conductors, 4 mm right-angle and straight screw-on banana plugs, and a 1000V CAT IV safety rating.

Fisher SONDE-82.175 is an 82.175 kHz self-contained transmitter for locating underground utilities. Compatible with TW82 and TW8800 line tracers, it helps trace non-metallic pipes and ducts accurately.

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Fluke 700HTH-1 Hydraulic Test Hose is rated for 10,000 psi (690 bar) working pressure and is designed for use with the Fluke 700HTP-1 hydraulic test pump. Constructed from stainless steel and nylon, it features self-sealing fittings with finger-tight connections. The hose supports connection to both a Fluke pressure module and a calibration unit under test simultaneously and is compatible with water and non-corrosive oil.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Allen-Bradley 1336-T-SP5A control transformer designed for 1336 PLUS, PLUS II, Force, and Impact drives, supporting 150–250 HP systems at 460 VAC with stable internal control power delivery.

Used GE 60 ALLUM 210-852-213 ultrasonic wedge for 60° shear wave inspection in aluminum. Precision engineered and fully compatible with GE MWB and Accuscan series transducers for reliable weld and flaw detection.

INNO Instrument PAL-1001 measurement lead set with red and black leads, safety connectors, 1000V CAT II / 600V CAT III rating, and 32A current rating for compatible INNO Instrument power meters and power analyzers.

The Wohler 3332/3337 GRP Rod Stainless End Piece keeps rod systems ready for dependable service with a durable Ø0.43 stainless steel replacement built for repair and maintenance.

The Wohler 3827 Guidance Sleeve supports 1-inch camera head inspection work by helping maintain smoother travel through pipe, vent, and flue inspection paths.

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

Used Sonatest SA372525RL, 2.25 MHz 0.375" 25° shear wave angle beam probe for weld inspection, flaw detection, and code-compliant testing. Compatible with Sonatest Wave, Sitescan D-50, and Masterscan D-70. Order from Cartoli or call 1-833-322-7865.