Search results for: 'panels'

Fluke FLUKE-CV401 is a 4 in (95 mm) ClirVu® infrared window with security key door latch for electrical inspection applications. It features AutoGround™ integrated grounding, IP67 environmental protection, and arc testing to 63 kA per IEEE C37.20.7 at KEMA.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Fluke LVD2 CT Volt Light detects 90–600 V AC without contact, using dual-sensitivity LED indicators and an ultra-bright flashlight for safe voltage checks.

Allen-Bradley 800E-3X10 is a latch-mounted normally open contact block for 22.5 mm 800E pilot devices, delivering reliable 10A switching for industrial control and signaling circuits.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Allen-Bradley 1746-A7 SLC 500 7-slot modular chassis supporting 1746 processors, I/O, and specialty modules. Designed for scalable PLC systems with side-mounted 1746 power supplies.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

Fluke 1748/15/EUS captures waveform and RMS profiles with Class A accuracy, 1500A iFlex probes, and multi-session logging for advanced power quality analysis.

Fluke 1746/30/EUS logs key power parameters with IEC Class A accuracy, 3000A iFlex probes, and multi-session recording for energy and power quality analysis.

Fluke 369 FC clamp meter offers precise leakage current detection with 1µA resolution, 61 mm jaw size, wireless reporting, and a filter function for noise reduction.

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.

AEG Modicon PC-A984-130 is a compact PLC CPU delivering reliable Modbus control, 4K user logic memory, and fast 5 ms/k scan time for Modicon 984 automation systems.

Allen-Bradley 800T-N26G green pilot light replacement cap for 30mm Bulletin 800T and 800H pilot lights. Designed for field replacement or completing assemblies without color caps.

Mersen USCC3I Y218038 fuse holder offers safe 3-pole Class CC protection with LED indication, DIN-rail mounting, and reliable 600V performance for control circuits.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

The Schneider Electric GV3P40 is a TeSys Deca motor circuit breaker designed for motor protection applications. This 3-pole device features a thermal-magnetic trip unit with an adjustable thermal protection range of 30 to 40 A and a rated current of 40 A. It supports AC networks up to 690 V at 50/60 Hz and provides defined short-circuit breaking capacities in accordance with IEC 60947 standards.

Eaton 9575H3A000 relay offers reliable DPDT switching for industrial control systems, featuring a 110/120V coil and heavy-duty performance for diverse AC/DC loads.

Application: Multi-Contact (MC4)∅4mm Solar Contacts

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.