Search results for: 'black'

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.

GAI-Tronics 13314-002 is a 16-ohm indoor/outdoor compression driver for compatible horn assemblies. It is rated for Div. 2 hazardous areas, features 1.375-18 UNEF horn threads, and carries a NEMA 4X enclosure rating.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

Wöhler 5529 Perlon Threaded Brush Kit brings four M10 brush sizes—8", 10", 12", and 14"—into one flexible cleaning set for matching different flue, chimney, and ventilation line diameters with fast, practical setup.

Adam Equipment Luna Precision Balance LPB 423i: Accurate, durable, and stylish. Perfect for lab use with a backlit LCD, USB & RS-232 interfaces for smooth data transfer.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

Allen-Bradley 889N-F3HFC-6F is a Bulletin 889N 3-pin straight female QD cordset with ToughLink TPE jacket, 16 AWG stranded copper conductors, 600V rating, and 6 ft cable length.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Hubbell HBL2731 delivers a durable 30A 480V L16-30P twist-lock connection for industrial 3-phase equipment, ensuring secure, reliable power performance.

Pruftechnik ROTALIGN PRO Laser Shaft Alignment Tool: Precision alignment for up to 6 machines. 80-hour battery life, IP67 protection, and easy setup for ultimate efficiency.

GigaSPEED XL® Cat 6 Patch Cord: Reliable, high-speed connectivity with LSZH safety for industrial & commercial networks. Flexible, durable, and designed for optimal performance.

Adam Equipment Luna Precision Balance LBB 12001e: Reliable, accurate weighing for labs with vivid backlit LCD, USB & RS-232, and rugged durability.

Delivers fast point-to-point continuity testing for grounded pathways and long-distance connections with polarity reversal, lead compensation, programmable thresholds, and 300 V CAT IV safety.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

The DJI Zenmuse H30T Shield Plus is a powerful, high-performance thermal imaging and zoom camera system for advanced rescue and security operations.

Adam Equipment Luna LPB 423e Balance: Precision weighing with 420g capacity, 0.001g readability, and sleek backlit display. Durable, efficient, and easy to use for labs.