Search results for: 'tipycall'

Eagle Eye HGD-2000-C3 Control Box with 3 Sensors Compatible with HGD-2000 for monitoring hydrogen gas buildup in battery rooms and similar facilities. Features dual relays, audible alarm, and AC power input.

Fisher SONDE-512 transmitter emits a 512 Hz signal to trace non-metallic pipes and ducts. Designed for push-rod use, it works with line tracers to locate pipe paths and underground blockages.

Fisher 972-097-10-00 metal detector headphones with clear audio, individual volume controls, and 1/4" jack. Padded on-ear design enhances signal clarity and helps detect subtle tones in noisy environments.

Fisher 203-168-00-00 Multi-Sensor microphone for XLT30. Versatile acoustic sensor for underground leak detection on concrete, asphalt, tile, and turf, with surface listening and pipe contact capability.

Fisher 203-655-60-00 Big Foot Microphone for XLT30. High-sensitivity ground sensor for hard surfaces, enhancing contact and reducing noise to accurately detect underground water leaks.

Fisher 972-097-10-00 headphones provide clear audio with dual volume controls and 1/4" jack. Padded ear cups and stretchable cable enhance comfort and help detect faint signals during operation.

Fisher 972-095-00-00 stereo headphones for M97 and M101 deliver clear audio with dual 1/4" and 1/8" plugs. Padded over-ear design, swivel cups, and noise reduction help detect subtle signals.

Fisher 103-6910-000 vinyl carry bag for M97-11 and M66 detectors offers durable protection and compact transport. Allows stem collapse and flat coil folding for easy storage and portability.

Fisher HANDLEKIT-TW6 3-piece kit converts TW6 into a two-box metal detector for blind search. Couples transmitter and receiver for single-user tracing of underground pipes, cables, and buried metal objects.

Fisher SONDE-82.175 is an 82.175 kHz self-contained transmitter for locating underground utilities. Compatible with TW82 and TW8800 line tracers, it helps trace non-metallic pipes and ducts accurately.

Fisher TW82HC 82.175 kHz underground line tracer for locating buried pipes and cables. Digital depth, azimuth, and signal current display with conductive and inductive tracing modes. Hard case included.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

Fluke FLK2AC/90-1000V5PK VoltAlert non-contact voltage detector 5-pack senses 90–1000V AC through insulation, featuring always-on operation, battery check, and CAT IV 1000V safety rating.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The MIP LM 3086 EPA3 is a laser-based opacity and dust monitor designed for continuous emissions monitoring in industrial stacks. It uses a single-pass, dual-path laser architecture with an optical reference path to measure opacity, optical density, and calibrated dust concentration values.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.