Search results for: 'application ip'

comemso Combined Mini-Charger-Tester HW Rev3.4 delivers fast portable CCS and CHAdeMO EVSE checks with touchscreen control, EV simulation, live results, and stored reports.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.

Fluke 772 Clamp Meter: Effortless 4-20 mA signal measurement & sourcing without breaking the loop. Compact, precise, and built for reliable control testing!

Testo 871 Thermal Camera: High-performance infrared imaging with SuperResolution, 240x180px resolution, and Bluetooth integration for smart, on-site analysis.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

Allen-Bradley 22A-D2P3N104 PowerFlex 4 drive delivers reliable 1 HP motor control with sensorless vector performance and 480V 3-phase compatibility.

Allen-Bradley 440K-T11208 safety interlock switch delivers reliable guard-door protection for machine-guarding systems and works with Trojan 5 tongue actuators.

3M Dynatel 1420-iD EMS Marker Locator kit with Keson PA14. The 1420-iD locates underground EMS markers, reads and writes 3M iD markers, estimates marker depth, and supports dual marker frequency search with RS232/USB PC interface.

The GE XL Vu D4030 is a 4mm industrial video borescope designed for remote visual inspection and stereo measurement of internal components and confined structures. This configuration supports forward and side viewing with interchangeable optical tips and articulating probe control.

Omega CN78030 delivers precise PID temperature and process control in a compact 1/16 DIN format, featuring relay output, universal sensor input, RS485 communication, and advanced autotune and fuzzy logic control.

Fluke 1535 Insulation Resistance Tester delivers 250V–2500V testing with insulation measurements up to 500 GΩ. Designed for industrial and solar environments with CAT IV 600V safety and automatic PI/DAR calculations.

Allen-Bradley 871C-C5A18 inductive proximity sensor delivers reliable non-contact metal detection with a 5 mm sensing range, normally closed output, and AC 2-wire operation for industrial automation applications.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

Siemens 3RH1131-1AK60 contactor relay delivers 3NO+1NC switching in a compact SIRIUS S00 format with a 110V 50 Hz / 120V 60 Hz AC coil and screw-terminal connection for control circuit integration.

The Mazak R26ZZ004340 Tool Data Read Head Sensor (model CIT3ASX1N12ST) is used in Mazak CNC machines for tool data identification and management. This M12 cylindrical sensor functions as a read/write head supporting automated tool handling and tool information tracking within compatible machining systems.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

The Fluke PTi120 is a rugged pocket thermal imager designed for industrial inspection. It features a fully radiometric 120 x 90 infrared sensor, 3.5-inch LCD touchscreen, IR-Fusion™ imaging, and a -20 °C to 150 °C temperature measurement range in a compact, portable form factor.

Fluke T3000 FC wireless K-type temperature module delivers accurate thermocouple measurements with onboard logging and Fluke Connect compatibility for remote monitoring and data sharing.