Search results for: 'MATTHEW'

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

Allen Bradley 1485P-P1R5-DR5 DeviceNet T-Port Connector provides reliable M12 trunk-to-drop branching for round media networks, ensuring durable industrial connectivity.

LED & HFE test Null DCV Capacitance measurement Overload protection Multi-Function Digital Multimeter Specifications Function Measurement Range DCV 0.1/2.5/10/50/250V, 1000V Null DCV DC ±5V/±25V ACV 10/50/250V, 1000V DCA 50μ/2.5m/25m/250mA, 10A Resistance ×1(0.2~2kΩ)/ ×10(2~20kΩ)/ ×100(20~200kΩ)/ ×1k(200~2MΩ)/ ×10kΩ(2k~20MΩ) Capacitance C(R×1k): 2000μF(Approx.) Max Battery Check 1.5V/9V, Product does not contain batteries Transistor hFE Test Yes Diode & LED Test Yes Continuity with Beeper Yes Front Panel Controls Range selector switch with “OFF” position, 0Ω adjust knob Power Source AAA(1.5V) x 2pcs and 9-Volt x 1pcs

Compact size, similar to iPhone Autoranging function True-RMS measurement Overload protection Large LCD Includes test leads Display 3 5/6 DC Voltage (V) 6V/60V/600V ±(0.8%+5d) AC Voltage (V) True-RMS 6V/60V/600V ±(1.0%+5d) DC Current (A) 1000mA/10A ±(2.0%+5d) AC Current (A) True-RMS 1000mA/10A ±(2.0%+5d) Resistance (Ω) 600Ω/6K/60K/600K/6M/60MΩ ±(1.0%+5d) Capacitance 6nF/60nF/600nF/6μF/60μF/600μF/6mF/100mF ±(4.0%+5d) Temperature -4°F~986°F ±(3%+5d) / -20°C~530°C ±(3%+5d) Frequency 1000Hz/6KHz ±(2.0%+5d) Safety CATII 600V Battery 1.5V AAA x 2

Portable, durable, and easy to use Supports 2.5mm universal connectors (for FC/SC/ST) Dust-proof & crash-proof cap design for laser head Wavelength 650 nm±10 nm Output Power 1 mW Laser CLASS II Tested fiber length 3-5 km Power (batteries) AA (1.5 V) x 2 Connector 2.5mm universal connector for FC, ST and SC OAL 7 in. Operating Temperature -10~55°C Storage Temperature -10~70°C Optional Accessory LC 1.25mm adaptor(5MT-7601-LC)

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

Fluke Networks OFP-200-S1625-MOD HDR module enables high-dynamic-range singlemode testing at 1310, 1550, and 1625 nm for OptiFiber Pro systems.

Fluke Networks LinkIQ delivers trusted 10 Gig cable and network testing with wiremap, PoE diagnostics, and switch information for professionals.

Fluke Networks MicroScanner2: Industrial Ethernet verifier with fast continuity, wiremap, and fault location to reduce downtime and ensure cable reliability.

Fluke IntelliTone Pro 200 Tone Generator and Probe: Accurately trace and locate twisted pair, coax, and cable runs with digital and analog signaling. Ideal for network technicians needing reliable cable tracing in active networks.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

Fluke Networks IntelliTone MT-8203-20 test leads with bed-of-nails clips ensure secure signal tracing and precise wire piercing for Pro 100/200 tools.

Fluke MDA-550/FPC Motor Drive Analyzer: 4-channel, 500 MHz testing with guided setup, preset profiles, and built-in professional report generation.

Fluke SMC-9-STST fiber optic cable: 524.93 ft single-mode connectivity for secure, high-speed data transfer with ST male connectors on both ends.

Fluke SM 9UM launch cord ensures accurate OTDR testing with single-mode SC/APC connectors, delivering reliable fiber optic network measurements.

Olympus Vanta VCA handheld XRF analyzer demo unit with Geochemistry 3-Beam, Alloy Plus, RoHS Plus, Precious Metals, Lead Paint, and Coating modes. Rugged multi-application tool for geochem, alloy verification, coatings, and compliance analysis.

Fujikura 70S+ Fusion Splicer: Fast, precise core alignment with 6-15s splicing time, dual cameras, and 200 splice cycles. Built for efficiency and reliability.

For 2.5mm universal SC/ST/FC to 1.25mm LC adaptor head.