Search results for: '0.5'

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

Toshiba VFS11-4015PL-WN VF-S11 transistor inverter for 3-phase AC motor control. Rated 2 HP with 380–500 V input/output and 0.5–500 Hz output frequency range.

The AEMC 6416 Clamp-On Ground Resistance Tester offers fast, accurate ground resistance measurements without disconnecting the system. This product includes an alarm, memory and an easy clamp-on operation, making it ideal for professionals needing reliable earth ground testing with convenience and safety.

AEMC MN251T AC Current Probe: 200A range, 1mV/A output, 10ft BNC lead—ideal for DMMs and voltage-input instruments needing accurate current readings.

Used Sonatest L15K12A, 15 MHz, 12 mm single element compression probe for high-resolution flaw detection and thickness gauging in thin materials. Compatible with Sonatest Wave, Masterscan 700M, Sitescan D-50. Request a quote or contact us today.

Monitor landfill gases efficiently with the QED Geotech GA5000 Portable Gas Analyzer! Measures CH₄, CO₂, O₂, H₂S, and CO with precision. Easy to use, ATEX certified, and supports environmental compliance. Learn more today!

AEMC SR651 AC Current Probe: Measures up to 1000A with 1mV/A output, banana jack connectors, low phase shift, ideal for power and harmonic meters.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

Eagle Eye battery testing kit series supports stationary battery diagnostics with portable testing tools, electrolyte measurement, and data management.

High-accuracy AEMC SR604 AC current probe with 1000A range, low phase shift, 1mA/A output, 5 ft lead, ideal for DMMs, loggers, oscilloscopes, and power measurements.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

The Schaevitz R36AS is an AC operated RVDT (Rotary Variable Differential Transformer) designed for angular position measurement in harsh environments. It features a non-contact electromagnetic design, stainless steel housing, and a Size 15 servo mount configuration. The sensor supports operation from -55°C to +150°C and provides calibrated angular sensing with high reliability and infinite resolution.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise speed control for 3-phase induction motors, supporting 1.5kW operation on 380–500V systems with compact panel-mount design and flexible control modes.

The Adam Equipment CB 501 Compact Balance is designed for precision and portability, offering accurate 500g weighing capacity with 0.1g readability. Ideal for labs, food service, or small-scale weighing tasks.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

AEMC 2135.59 ground resistance tester kit delivers 3P ground resistance, 2P resistance, AC/DC voltage, and AC current measurement with MN72 probe support.

AEMC 2135.58 Model 6424 Ground Resistance Tester delivers digital 3-point and 2-point ground resistance testing with AC/DC voltage measurement and auto-ranging operation.

Application: Open barrel contacts D-sub, Molex, AMP Style Pin

Application: Open barrel contacts D-sub, Molex, AMP Style Pin

Application: Open barrel contacts D-sub, Molex, AMP Style Pin

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.

The TRACO POWER TSP 090-124 is a 90W DIN-rail mounted industrial power supply providing a regulated 24VDC output at up to 3.75A. Designed for factory and control panel environments, it features universal 85–264VAC input, convection cooling, adjustable output voltage, DC-OK signaling, and integrated protection functions.