Search results for: 'MIDA646'

Wohler 56037 Anti-Slide Mat prevents the camera case from sliding on the floor, 12" x 5". Wohler parts and accessories.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

AEMC MD305 AC current probe: 600A range with 1mA/A output, rugged clamp design, banana plugs, ideal for meters with ≤5Ω input.

Fluke FPC1S-MDA-500-1 Premium Care provides one year of service coverage for MDA-500 Series test tools. Coverage includes annual calibration or performance check, repair services with parts and labor, expedited freight, accessory replacement, software updates, and priority technical support. No loaner units included.

The INNO Instrument VIEW600 OTDR is a modular fiber Optical Time Domain Reflectometer configured with a three-wavelength OTDR module supporting 1310 nm, 1550 nm, and a 1625 nm live testing port. This provides dynamic range performance of 39 dB, 38 dB, and 39 dB for characterization of metro, access, and FTTx fiber networks.

Static dissipative mat for workstation Heat tolerance: 70° C Resistivity Face & Center & Bottom Layers: 10M~1KMΩ/SQ Combination layer: 1K~1MΩ/SQ, Static decay time: < 0.5sec

Static dissipative mat for workstation Heat tolerance: 158°F (70° C) Resistivity Face & Center & Bottom Layers: 10M~1KMΩ/SQ Combination layer: 1K~1MΩ/SQ, Static decay time: < 0.5sec

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

Laser output is class 3A (around 3~5 milliwatt) Maximum opereration distance is 8 km Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Three operation modes available: "CW" (Continuous wave output), "Pulse" and "Off" modes Continuous wave output mode (CW) for steady fault illumination Pulse mode helps to locate faults under high ambient light conditions Support LC 1.25mm connectors The button switch permits easy one handed operation Handy, pocket pen design 2 AAA-size alkaline batteries provide 50 hours of continuous operation

Certified pre-owned Megger MIT1025: 10 kV insulation resistance tester designed for high-voltage equipment diagnostics. It delivers fast, stable readings up to 20 TΩ, supports PI/DAR testing, and includes advanced filtering for noisy environments—ideal for substations, motors, cables, and transformers.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

Fluke Networks SMC-9-FCAPC/FCAPC is a single-mode fiber optic launch cord designed for FC/APC to FC/APC connections. It features a 9 µm core with a total length of 160 meters (524.93 ft) and is intended for use with network testing devices requiring single-mode fiber connectivity.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Banner QS30EDVQ diffuse-mode photoelectric sensor with visible red 660 nm beam and bipolar NPN/PNP outputs offers fast response and reliable 1400 mm detection for industrial automation.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke single-mode fiber optic launch cord ensures precise, reliable OTDR testing with SC/APC to FC/UPC connectivity, ideal for network professionals.

Fluke carrying case pouch: Durable storage for test equipment with organized compartments for easy transport and maximum usability.

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

Fluke Networks SRC-9-SCLCAPCKIT-M single-mode 9 µm test reference cord kit with metal LC/APC connectors, designed for accurate optical loss testing and seamless use with CertiFiber Pro fiber testers.

Fluke Networks TRC-SM-VERIFY-MPO24P is a reference-grade single-mode MPO24 verification cord for CertiFiber Max optical loss testing, ensuring accurate reference validation with pinned MPO24 fiber links.