Search results for: 'fusion use'

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

Sumitomo T-55 Fusion Splicer: Fast 7-sec weld, 9000 splice count, and rugged design. Perfect for high-performance fiber splicing with precision and reliability. Made in Japan.

Sumitomo T-55 Fusion Splicer: Fast, reliable core alignment fusion splicing. 7-sec splice time, 20-sec heating. Built for precision, durability, and easy operation.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

INNO View 3 Fiber Fusion Splicer: Industry-leading splicing with 520x magnification, quick splice time, and durable design. Perfect for SM, MM, and DS fiber applications

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

Elevate your fiber optic game with the Fujikura 90S+ Fusion Splicer! This powerhouse combines lightning-fast splicing, advanced core alignment, and Bluetooth cleaver tracking for unmatched precision. Whether you’re a seasoned pro or stepping up your game, the 90S+ is your ticket to flawless fiber connections. Don’t let subpar equipment slow you down – click now to upgrade your toolkit and splice like a pro!

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

Fujikura FSM-50R12 ribbon fusion splicer delivers fast 12-fiber ribbon splicing with auto arc calibration, rapid sleeve heating, dual-view monitoring, and CT-30 plus HJS-02 tools for precise ribbon preparation.

INNO Instrument M7+ compact fusion splicer kit with Active V-Groove cladding alignment and a 4.3" full-touch display. Supports single-fiber SM/MM/DS/NZDS splicing, quick splice/heating cycles, and data output via USB-C or View Pro Manager cloud.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

INNO M7 Fusion Splicer + Sumitomo Cleaver: Fast, precise fiber splicing with 130 cycles/battery. Ultra-portable, 4.3” touchscreen, and rugged design!

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

Fujikura BTR-15 Li-Ion Battery: Reliable power for 90S & 90R Fusion Splicers. Enjoy up to 4 hours of seamless performance for efficient, on-the-go splicing.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

Sumitomo T-72C+ Fusion Splicer: High-definition core alignment with fast splice times, 320 cycles, and durable design for efficient fiber optic splicing.

Efficient Arc Fusion Splicer with dual CMOS cameras and a 4.3” LCD screen. Ideal for single to 12 fiber splicing with long-lasting battery and fast results.

Fluke Ti300 60 Hz infrared thermal imaging camera kit featuring IR-Fusion® image blending, LaserSharp® Auto Focus, 240×180 resolution, and SmartView® software.