Search results for: 'loss designed'

Fluke Networks TRC-SM-VERIFY-MPO12P is a reference-grade single-mode MPO12 verification cord for CertiFiber Max systems, ensuring accurate reference validation for pinned MPO Type A fiber testing.

Fluke Networks SFSINGLEMODESOURCE – Dual-wavelength light source for singlemode fiber (1310/1550 nm). Designed for use with optical power meters in fiber loss testing setups. Part of the SimpliFiber Pro family.

Fluke Networks SRC-9-SCLCAPCKIT-M single-mode 9 µm test reference cord kit with metal LC/APC connectors, designed for accurate optical loss testing and seamless use with CertiFiber Pro fiber testers.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Fluke Networks FTK1200 is a SimpliFiber Pro multimode fiber verification kit with VisiFault. The kit includes an optical power meter, 850/1300 nm multimode source, FindFiber Remote ID source, magnetic straps, adapters, and a carrying case.

Fluke Networks MFTK-SM1310-SM1550 – Complete MultiFiber Pro OLTS kit for Tier-1 singlemode MPO testing. Includes MF-100 power meter and dual light sources (1310 nm & 1550 nm) for accurate loss, continuity, and polarity certification.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

The AFL FuseConnect SC FUSE-SC9SMA-6 APC is a high-performance, field-installable single-mode connector designed for 900 µm fiber. This fusion splice-on connector features a pre-polished ferrule for easy installation without crimping, ensuring low insertion loss and optimal signal integrity. Ideal for use in FTTP networks, data centers, and telecommunications, the SC/APC design provides reliable connectivity and superior performance in demanding environments.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

Fluke FTK1000 SimpliFiber Pro Kit – Entry-level multimode fiber testing kit with optical power meter and 850/1300 nm light source. Measures optical loss, power, and continuity in enterprise and LAN fiber networks.

The CFP2-100-QI kit bundles dual Versiv mainframes, quad OLTS fiber modules, double-ended inspection cameras, test reference cords, and accessories — enabling full multimode and singlemode fiber certification with automated loss testing and end-face inspection.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

Fluke Networks SRC-9-SCFC-KIT singlemode test reference cord kit delivers accurate fiber loss measurements for FC-terminated links using reference-grade SC/FC and FC/FC cords designed for professional fiber testing.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks 2M Singlemode TRC cable with SCAPC-LCAPC connectors ensures precise optical loss testing and reliable fiber certification performance.

Fluke Networks MFTK-MM850-SM1550 – Dual light source kit for MPO fiber testing. Includes 850 nm multimode and 1550 nm singlemode sources for Tier-1 (OLTS) loss, continuity, and polarity verification with the MultiFiber Pro MF-100 power meter.

ILSINTECH Swift KF4 Fiber Optic Splicer: Precision splicing with built-in cleaver, user-friendly touchscreen, and durable design. Perfect for field professionals.