Search results for: 'panel'

AEMC 400D-10 Digital FlexProbe® offers TRMS AC current up to 400A with 6ft lead, compact 10” sensor, ideal for tight spaces and industrial to residential use.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

Fluke FLUKE-CV401 is a 4 in (95 mm) ClirVu® infrared window with security key door latch for electrical inspection applications. It features AutoGround™ integrated grounding, IP67 environmental protection, and arc testing to 63 kA per IEEE C37.20.7 at KEMA.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Fluke LVD2 CT Volt Light detects 90–600 V AC without contact, using dual-sensitivity LED indicators and an ultra-bright flashlight for safe voltage checks.

Allen-Bradley 800E-3X10 is a latch-mounted normally open contact block for 22.5 mm 800E pilot devices, delivering reliable 10A switching for industrial control and signaling circuits.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Allen-Bradley 1746-A7 SLC 500 7-slot modular chassis supporting 1746 processors, I/O, and specialty modules. Designed for scalable PLC systems with side-mounted 1746 power supplies.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

Fluke 1748/15/EUS captures waveform and RMS profiles with Class A accuracy, 1500A iFlex probes, and multi-session logging for advanced power quality analysis.

Fluke 1746/30/EUS logs key power parameters with IEC Class A accuracy, 3000A iFlex probes, and multi-session recording for energy and power quality analysis.

Fluke 369 FC clamp meter offers precise leakage current detection with 1µA resolution, 61 mm jaw size, wireless reporting, and a filter function for noise reduction.

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Fluke 279FC I/B Thermal Multimeter combines True-RMS measurements with built-in thermal imaging and wireless Fluke Connect for safer troubleshooting.

Allen-Bradley 193-EEDB E1 Plus electronic overload relay provides precise three-phase motor protection with adjustable 3.2–16A current range, selectable trip classes, and direct mounting to 100-C IEC contactors.

Toshiba VF-S11-4015PL-WN (R5) industrial inverter delivers 1.5kW three-phase motor control for pumps, fans, and conveyors with compact VF-S11 design and EMC filtering. 

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise 3-phase motor speed control for 380–500V systems, supporting 1.5kW motors with compact design, high torque output, and flexible control modes.

Fluke BK120-T5-600 kit combines a smart circuit breaker finder with a T5-600 tester for fast breaker identification and safe voltage, current, and continuity checks.