Search results for: 'panels'

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

Fluke AC288 SureGrip Terminal Block Probe Set delivers safe, precise connections to spring clamp and screw terminals using retractable stainless steel probe tips compatible with 4 mm test leads.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

Fluke TP175 TwistGuard test probes deliver adjustable 2mm probe tips with CAT IV 600V safety ratings, providing controlled tip exposure for secure electrical measurements across compatible Fluke test leads.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Thomas & Betts 5257 is a 2 in non-insulated 90° liquidtight conduit connector for liquidtight flexible metallic conduit, with NPT threads and malleable iron body construction. 

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Fluke FLK-393FC-PVLEAD Clamp Meter Bundle includes the 393 FC CAT III 1500 V True-RMS clamp meter with iFlex probe and Pomona PVLEAD1 and PVLEAD3 solar PV test lead sets. It measures up to 1500 V DC, 1000 V AC, and 999.9 A AC/DC, with up to 2500 A using the iFlex probe.

The Amprobe AT-6010 Advanced Wire Tracer Kit is designed to trace energized and de-energized wires, identify breakers and fuses, and locate shorts or opens. The kit includes a receiver with large LCD display and transmitter supporting operation up to 600 V AC/DC in CAT III environments.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Allen-Bradley 800T-FXJE6A5 emergency stop pushbutton with maintained push-pull action, jumbo red E-STOP mushroom head, and dual normally closed late-break contacts for industrial safety circuits.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

Fluke FLK-100-CLKT IR window offers arc-resistant 4-inch C-Range inspection access with Kwik Twist design, IP65 rating, and CLIRVU coating for clear thermal imaging.

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.

3Z RF Vision Antenna Alignment Tool: Accurate, weather-resistant alignment with built-in camera & AR. Perfect for precise antenna measurements and efficient setup.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.