Search results for: 'monitor'

The Fluke i17XX-FLEX3000/3PK is a three-pack of 24 inch iFlex® flexible current probes rated to 3000A AC. Designed for use with compatible Fluke 17XX Series Energy and Power Loggers, these Rogowski-style probes connect directly to the instrument for expanded high-current measurement capability.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

The Fluke PTi120 is a rugged pocket thermal imager designed for industrial inspection. It features a fully radiometric 120 x 90 infrared sensor, 3.5-inch LCD touchscreen, IR-Fusion™ imaging, and a -20 °C to 150 °C temperature measurement range in a compact, portable form factor.

The Fluke 971 Temperature Humidity Meter is a handheld instrument for measuring air temperature, relative humidity, dew point, and wet bulb temperature. It features a backlit dual display, 99-point data storage, Min/Max/Avg functions, and a quick-response capacitance sensor for indoor air quality assessment.

Fluke I17XX-FLEX1500 iFlex flexible AC current clamp measures up to 1500A AC and connects directly to compatible Fluke power and energy loggers, enabling easy installation on large conductors.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Modicon AS-B875-002 is an 8-channel analog input module designed for use with Modicon 984 programmable controllers. It accepts either 1–5 V or 4–20 mA input signals and converts field analog signals into digital data for PLC processing.

The Allen-Bradley 442G-MABE1 Escape Release Module with Handle is a safety accessory for the Guardmaster 442G Multifunctional Access Box. It allows personnel to open a locked safety guard from inside a safeguarded area without tools, supporting emergency exit functionality.

The Emerson 701PBKKF SmartPower™ Black Power Module is an intrinsically safe primary lithium power module designed for Emerson wireless field devices. It supports hazardous area installations and is certified for safe replacement while installed. The module is non-rechargeable and intended for long-term field operation.

The ABB RDIO-01 is a digital I/O extension module designed for use with ABB drive systems. It provides three digital inputs and two relay outputs for expanding control and monitoring functions within compatible ABB drive architectures.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

Fluke 1623-2 Earth Ground Tester delivers accurate ground resistance and soil resistivity testing with 3- and 4-pole methods, stakeless clamp testing, USB data storage, and rugged IP56 protection.

Fluke 287 CAL logging multimeter delivers True-RMS accuracy with TrendCapture graphing, onboard data logging, and NIST traceable calibration with data.

ABB ACH401603035 HVAC variable frequency drive delivers precise fan and pump speed control in 480V three-phase systems, optimizing airflow and fluid movement using ACH400 HVAC-focused drive architecture.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Emerson Phoenix Contact 1X00102H01 is an Ovation DCS power distribution module that delivers protected 5V, 12V, and 24V DC power to controller and I/O modules with diagnostic support.

Fluke 1736/B Power Logger records 3-phase energy data with Fluke Connect, flexible probes, and smart setup for accurate power and energy studies.

Fluke 1777 Analyzer: Handheld three-phase power quality logging with automatic measurements, high-speed transients capture, and Bluetooth/Wi-Fi connectivity.

Fluke i3000s Flex Clamp: Measure up to 3 kA AC in tight spaces with flexible probe and versatile 30/300/3000 A ranges.

Wöhler DM 2000 Digital Manometer Kit brings fast, straightforward pressure measurement with one-button operation, rapid response, and a 0.01 to 2,000 hPa range for HVAC, gas, environmental, and industrial testing.

Wöhler 4286 Wadding Filter 25 pcs. supports routine sample-path maintenance for Wöhler A 450 and A 550 combustion analyzers with a convenient replacement pack for ongoing flue gas analysis work.

Elevate your travel game with the ultimate defense for your EVO II 6K gimbal camera - the Gimbal Cover by Autel Robotics. Crafted from transparent plastic, this sleek armor not only secures your gimbal but also shields it from any potential damage. Enjoy your adventures without a hint of worry, as your camera remains guarded and ready to capture stunning moments.