Search results for: 'systems'

The Sauermann CO2 Ambient Probe, offering a 0-5000 ppm range, serves as an essential instrument for safeguarding optimal indoor air quality by continuously tracking and controlling carbon dioxide concentrations. Its ability to provide live data and compatibility with various integration possibilities enhance its utility.

The Hydrajaws Safety Lifeline Cable Tester Kit1 (Frame Only) for operators who already own an M2000 Tester, enables engineers to validate the installation of swaged components of new or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN.

Fluke DTX-1800 CableAnalyzer™: Ultra-fast 12-sec Cat 6 tests, 900MHz capability, fiber/copper support, 12-hour battery. Boost efficiency & accuracy!

The Westinghouse 5X00070G33 delivers precise multi-channel voltage signal acquisition for Ovation DCS environments, supporting ±5V and ±10V inputs with isolated channels and high-resolution data capture for reliable industrial monitoring.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

Wohler 17535 delivers bold chimney and flue cleaning reach with a 35 cm hard flatwire spring steel brush and M10 threaded connection for professional soot and deposit removal.

Thomas & Betts Red Dot 2CCD weatherproof two-gang duplex receptacle cover delivers die-cast metallic protection for dual duplex outlets with gasketed sealing and device-mount installation.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Fisher 972-097-1000 stereo headphones for TW6 offer clear audio with individual volume controls and 1/4" jack. Reduce noise, improve signal clarity, and extend battery life for detecting and line tracing.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

Fluke Networks ADP-MPO12/24-A is an MPO APC adapter coupler designed for verification and inspection of 12 or 24 fiber MPO APC cables when used with CertiFiber Max optical loss test systems.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

Allen-Bradley 200-EX640Z1 instantaneous control relay with a 115–125VDC coil, designed for reliable multi-pole switching. Features 6 normally open and 4 normally closed contacts for industrial control logic.

Allen-Bradley 802X-B4 watertight limit switch with top push rod actuator and snap-acting 1NO/1NC contacts. Built for reliable position sensing in harsh industrial control applications.

Fluke PVA-1500 PV Analyzer measures high-efficiency solar modules with fast 1500V, 30A I-V curve tracing and includes 3 years of Fluke Premium Care.

Emerson Fisher 38B6041X152 I/P Assembly Shroud Kit for FIELDVUE DVC6000 digital valve controllers, converting 4–20 mA control signals into proportional pneumatic output for accurate valve positioning.