Search results for: 'insulated'

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

Fluke CXT170 Extreme Case provides rugged, watertight protection for Fluke handheld test tools. Designed with a sealed hard shell, purge valve, and secure latch closure for demanding field environments.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

Fluke Networks P4480004 replacement line cord designed for TS52, TS44, and TS42 test sets. Features a durable braided cable and integrated 346A plug for reliable field testing instrument connectivity.

Fluke TP175E TwistGuard Test Probes provide adjustable 2mm probe tips with integrated 4mm adapters, delivering safety-rated electrical testing for multimeters while minimizing exposed metal during measurements.

The AMP 531-353-5 is a panel mount card edge connector from TE Connectivity AMP Connectors. It features six power positions arranged in two rows with female contacts and solder termination. The connector is designed for panel mounting and accepts 0.062 inch card thickness, using a glass-filled polyester housing.

Pomona 5830-2 Flexible Maxigrabber® Test Clip delivers secure electrical connections using a rotating pincer contact and banana jack interface, supporting custom test leads and reliable probe access.

Pomona 4911A-36-0 patch cord features retractable sheath banana plugs, molded strain relief, and nickel-plated contacts for reliable test connections.

Pomona 1270 adapter converts double banana jack instruments to BNC with shielded, tarnish-resistant contacts and stacking banana plug versatility.

Fluke 700TC1 thermocouple mini-plug kit includes 10 connector types for terminating thermocouple wire to 700 and 740 series calibrators.

AEMC fused test lead set with red/black color coding, 6.5ft length, 4mm banana plugs, and built-in 0.63A fuses for safe 1000V CAT IV measurements.

AEMC lead set includes 2 color-coded 4 ft red and black leads with test probes and alligator clips, ideal as replacement for models 1026 and C.A 7027.

Fireye 60-2919-1 is a 1 in NPT mounting flange for Phoenix and InSight II flame scanner installations, supporting scanner mounting, purge air routing, and thermal isolation in burner systems.

SKF CMSS65-010-00-12-10 is a CMSS 65 series 5 mm eddy current probe with armored cable, 1/4-28 threaded fully threaded case, 3.0 cm case length, and 1.0 m overall length.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

Pomona 3788 BNC Female to Minigrabber Test Clip Breakout enables fast signal access from BNC male cables to dual minigrabber clips, delivering secure low-resistance connections for electronic testing and diagnostics.

Fluke AC285-FTP Clips: Secure, high-voltage alligator clips and adaptors for FTP-1 and FTPL-1 probes. 1000V rated, firm SureGrip design.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Fluke TiS75+ thermal imager delivers 384x288 resolution, 27Hz imaging, dew point alarms, and voice annotation to simplify industrial and building inspections.

Fluke 368 FC clamp meter provides 1μA resolution, 60A leakage testing, wireless Fluke Connect logging, and a shielded 40 mm jaw for accurate troubleshooting.