Search results for: 'monitor'

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

Eagle Eye DLV-Pro Data Logging Voltmeter for recording, viewing, and analyzing cell voltages from 0-20 VDC with on-site statistical, graphical, and discharge test analysis.

Fisher XLT-100 Compact Acoustic Leak Detector delivers precision underground water leak detection with adjustable frequency filters, 50/60Hz notch filtering, LCD signal display, and extension rods for extended reach.

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

The Ovation 5X00481G01 OCR1100 Processor Module is a controller Atom CPU module designed for industrial automation and control systems. It features an Intel® Atom™ D525 1.8 GHz processor, 2 GB DDR3 SDRAM, and 4 GB eMMC storage, operating on Windows Embedded Standard 7. The module supports extended temperature operation from -40°C to +70°C.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke FLK-PTI120 9HZ 400C Pocket Thermal Imager is a rugged handheld infrared camera with 120 x 90 resolution and a -20°C to 400°C measurement range. It features a 3.5" LCD touchscreen with IR-Fusion™, Wi-Fi connectivity, Asset Tagging, IP54 protection, and 1-meter drop rating.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Turck NI10-G18SK-RZ3X2 55MM inductive proximity sensor with 10 mm rated switching distance. Non-flush M18 threaded design with chrome-plated brass housing. Supports 20–250 VAC or 10–300 VDC operation using a 2-wire NC output. Terminal chamber connection with IP67 protection.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Amprobe AMP-320 clamp meter measures 600 A AC/DC with True RMS, temperature, motor rotation, inrush current, and HVAC-ready diagnostics.

Fluke 729 150G FC automatic pressure calibrator delivers hands-free pressure generation, HART communication, mA measurement, and Fluke Connect compatibility.

Allen-Bradley 1492-UF824 fusible terminal block provides compact DIN-rail circuit protection with LED blown-fuse indication for low-voltage AC/DC control and PLC applications.

Allen-Bradley 100S-C72DJ14C safety contactor delivers 72A IEC switching with mechanically linked contacts and a 24V DC diode-suppressed coil, providing reliable feedback for safety-related control circuits.

Metso Automation IOP351 is a relay output I/O interface module designed for Metso control systems, enabling reliable field device switching and control in industrial automation and process environments.

Fluke FLK-729 30G automatic pressure calibrator simplifies pressure tests with auto pumping, mA measurement, HART communication, and onboard documentation tools.

Fluke 1760 TR US Class-A recorder captures fast transients, harmonics, and detailed power quality data with 10 MHz bandwidth, GPS sync, and 1000 V sensors.

Fluke 1748/15/EUS captures waveform and RMS profiles with Class A accuracy, 1500A iFlex probes, and multi-session logging for advanced power quality analysis.

Fluke 1746/30/EUS logs key power parameters with IEC Class A accuracy, 3000A iFlex probes, and multi-session recording for energy and power quality analysis.