Search results for: 'base'

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.

Bently Nevada 330101-00-80-05-02-00 3300 XL 8mm Probe built for vibration sensing in 3300 XL monitoring setups, with attached cable and connector shown in the provided images.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

SKF CMSS65-010-00-12-10 is a CMSS 65 series 5 mm eddy current probe with armored cable, 1/4-28 threaded fully threaded case, 3.0 cm case length, and 1.0 m overall length.

INNO Instrument PAC-1006 large alligator clip adapter set with red and black insulated clips, safety connector interface, and 600V CAT IV 19A rating.

Eagle Eye HGD-4000 hydrogen gas detector with intrinsically safe design, AC power input (85–265 VAC), dual internal alarm relays, and LED status indication.

Eagle Eye HGD-2000-C3 Control Box with 3 Sensors Compatible with HGD-2000 for monitoring hydrogen gas buildup in battery rooms and similar facilities. Features dual relays, audible alarm, and AC power input.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Fisher TW6-KIT is a pipe and cable locator kit for locating and tracing buried conductive utilities using inductive and conductive operating modes. The system operates at 81.92 kHz and includes a search handle, carrying case, and headphones.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

Omega CN78030 delivers precise PID temperature and process control in a compact 1/16 DIN format, featuring relay output, universal sensor input, RS485 communication, and advanced autotune and fuzzy logic control.

The GE ConnectPort X4-H ZB HSPA+ is an industrial cellular and ZigBee routing gateway designed for remote asset monitoring in water treatment and power applications. It combines HSPA+ cellular connectivity with ZigBee mesh networking in a rugged NEMA 4X enclosure.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.