Search results for: 'control'

This gun will do cable tie widths from 3/32" - 3/16" and thickness up to 1.6mm. It has an adjustable tension control and neatly cuts the ends of cable ties.

ABB NKTU11-14 INFI 90 Termination Loop Cable supports INFI 90 system cable connections with a loop cable format and printed 300V, 90°C, #22 AWG construction details.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

Fluke 787B ProcessMeter combines a precision digital multimeter with mA loop calibration to measure, source, and simulate current for process control work.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

GE Inspections Phased Array Probe: Compact, portable UT flaw detector with advanced features. Delivers precise results in real-time for efficient industrial inspections.

WAGO 750-452 Analog Input Module delivers reliable PLC current signal acquisition for WAGO 750 I/O nodes, enabling precise control in industrial automation.

The Fluke 700PTP-1 is a pneumatic test and vacuum pump designed to generate pressure up to 600 psi (40 bar) and vacuum down to -13 psi (-0.9 bar). It features adjustable stroke control, a vernier for fine pressure adjustment, and dual 1/4 in NPT female ports for simultaneous connection to a reference gauge and device under test.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

Fluke INPP10 insulated pump pliers deliver fast adjustment, self-locking grip, and 1000 V protection for safe work on energized circuits.

Fluke 710 mA Loop Valve Tester simplifies HART control valve testing with built-in valve diagnostics, mA loop calibration, and ValveTrack software.

Fluke Networks OptiFiber Pro HDR OTDR with WiFi enables precise singlemode fiber testing for enterprise, datacenter, and PON applications.

Fluke 8.5MM Videoscope: 1.2m dual view probe for DS701/DS703 FC, perfect for industrial inspections, welds, switches, and hydraulic lines.

Telergon 400A DC Disconnect Switch: High-performance, 1500V power isolation for solar & industrial use. Reliable, durable, and built for safety!