Search results for: 'control for'

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Wöhler Camera Holder VIS 700 keeps the 1.5" camera head positioned face down for controlled visual inspection work with the VIS 700 system.

Fluke TP82 insulation piercing probe tips enable non-destructive testing through wire insulation. Designed for 4 mm banana leads, they support precise diagnostics on automotive sensors and wiring without stripping insulation.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

Pomona 5144-48-0 SMD Microtip Test Probe delivers precise probing of surface-mount contacts using a flexible stainless steel microtip and 48-inch lead with stacking banana plug for reliable electronics testing.

Wohler 2016 Camera Trolley adds smooth, stable camera mobility for inspection workflows, helping position compatible camera equipment with controlled movement in confined pathways and inspection routes.

Allen-Bradley 1769-IA8I Compact I/O module delivers eight individually isolated 100–120 VAC discrete inputs for CompactLogix systems, enabling reliable AC signal monitoring in industrial control applications.

Wöhler VIS 700 HD Inspection Camera 7082 provides high-resolution inspection of pipes, ducts, and flue systems with a detachable 1.5 in pan-and-tilt camera head, adjustable focus, and a 100 ft push rod for extended reach.

The Ovation 5X00226G03 is an I/O Interface Module designed for use within Ovation DCS systems. Manufactured by Emerson, this module supports industrial control applications and is identified under model number 5X00226G03. Product weight is 0.34 kg with listed dimensions of 12.1 × 5.2 × 16.6 cm.

The Wöhler 3681 Camera Roller Guide helps guide camera heads and push rods smoothly during inspection work, supporting controlled movement through remote visual inspection workflows.

Wohler 6889 Re-Lining Adapter Kit supports chimney re-lining and flue inspection with compatible Wohler camera systems, helping maintain centered travel and controlled positioning during chimney service work.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

Fluke 771 clamp meter: Measure 4–20 mA signals without breaking the loop, 0.2% accuracy, detachable clamp, and dual backlit display for easy troubleshooting.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Mitsubishi FR-A7N-ETH is an internal Ethernet communication option card for Mitsubishi 700-series adjustable speed drives. It provides multiprotocol Ethernet connectivity for industrial automation networks and supports configuration and monitoring through an embedded web server interface.

The PENTA ALROC CMF2/40 NP is a 14-40 mm cable preparation kit built for MV cable work, combining the MF2/40 multifunction tool with the ASC40R1 for outer sheath, insulation, and bonded semiconductor removal in one field-ready case.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.