Search results for: 'control'

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

Fluke 715 Volt/mA Loop Calibrator measures and sources 0–20 mA and 4–20 mA signals with high accuracy, provides 24 V loop power, and supports PLC and transmitter calibration in a compact handheld design.

Fluke 705 Loop Calibrator delivers precise mA sourcing, simulation, and measurement with 0.02% accuracy, built-in 24V loop supply, and simultaneous mA and percent-of-span display for efficient loop calibration.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke FLK-FEV150/TY1 EV Charging Station Analyzer enables fast, safe AC EVSE testing with Type 1 connector, auto control pilot simulation, and guided workflows.

Allen-Bradley 871C-C5A18 inductive proximity sensor delivers reliable non-contact metal detection with a 5 mm sensing range, normally closed output, and AC 2-wire operation for industrial automation applications.

Fluke FEV150 EV Charging Station Analyzer performs guided safety and performance testing of AC EV chargers with Type 1 and Tesla plugs.

Fluke FEV150 BASIC EV charging station analyzer tests safety and performance of AC chargers with guided workflows and control pilot simulation.

Fluke II915-SB140 package detects gas leaks, partial discharge, and vessel leakage using acoustic imaging and a 40 kHz sound beacon for fast pinpointing.

Amprobe SM-20A: Digital sound meter with A/C weighting, LCD display, internal memory, and USB connectivity for precise acoustic analysis and compliance testing.

Fluke Wireless 4-20 mA DC Clamp Meter: Detachable clamp for safe loop testing, logging up to 65,000 readings, perfect for industrial control systems.

Autel Robotics delivers high-performance drone technology with the Alpha L35T Gimbal. Capture stunning 4K video and precise thermal imaging with ease.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

The Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe combines digital and analog toning to trace and locate copper cables on active or inactive networks. It features visual LED indicators, RJ11/RJ45 adapter cables, and automatic shut-off for efficient field use.

The GE XL Vu D4030 is a 4mm industrial video borescope designed for remote visual inspection and stereo measurement of internal components and confined structures. This configuration supports forward and side viewing with interchangeable optical tips and articulating probe control.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.