Search results for: 'application ii'

Westinghouse 9966D75G01 IQ Data Plus II power monitoring display delivers three-phase electrical measurement including amps, volts, watts, power factor, and energy data for digital metering systems.

Fluke TL76 test lead set with removable IC caps for tight probing, CAT III/IV safety ratings, and 1.4m silicone leads for versatile electrical testing.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

Unlock professional-grade aerial imaging with the Autel EVO II Pro V2! Capture stunning 6K videos and 20MP photos with a 1” CMOS sensor, adjustable aperture, and advanced obstacle avoidance. Perfect for pros in photography, surveying, and more!

Fluke Networks OptiFiber Pro OTDR delivers precise fiber certification and troubleshooting for enterprise and data center networks with efficient testing performance.

Fluke 435-II power quality and energy analyzer for Class A three-phase testing, with PowerWave capture, transient analysis, harmonics, flicker, mains signaling, energy loss measurement, and power distribution troubleshooting.

Fluke TLK290 probe set: Flexible sockets and alligator clip for safe, precise testing of motors, 3-phase plugs, and 4–8 mm connections.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

The Fluke AC280 SureGrip™ Hook Clips are a pair of nickel-plated electrical test clips designed for secure, hands-free measurements. Featuring a narrowing profile and controlled hook opening, they support precise connections and are rated up to CAT III 1000 V.

Allen-Bradley 1336-RLOAD-SP5A load resistor designed for 1336 adjustable frequency drives. Supports 575V operation in Frame E systems rated 150–300 HP for controlled load management.

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

Amprobe 5XP-A compact digital multimeter with VolTect™ detection, data hold, and Magne-Grip™ holster for hands-free electrical troubleshooting.

Fluke TL175 test leads with TwistGuard and WearGuard ensure safer testing. Adjustable probe tips and heavy-duty silicone for flexible performance.

Temperature range: -58°F ~ 1076°F (-50°C to 580°C) Emissivity adjustable: 0.10 to 1.00 Distance spot ratio: 16:1 Resolution: 0.1°C / 0.1°F Temperature Range -50°C~580°C(-58°F ~1076°F) Accuracy ±2°C or ±2%°C/td> Distance Spot Ratio 16：1 Emissivity 0.1~1.0 Laser class Class II ,

AEMC 514 Clamp-On Meter delivers AC/DC current, TRMS, voltage, frequency, ohms, and continuity with a large, 4000-count display and 1-year warranty.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

Fluke FTP17XXPQ fused test probe set delivers secure voltage indication for three-phase power quality testing, using 11A fused probes and AC285 alligator clips designed for Fluke analyzers and loggers.

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.

Fluke TP175 TwistGuard test probes deliver adjustable 2mm probe tips with CAT IV 600V safety ratings, providing controlled tip exposure for secure electrical measurements across compatible Fluke test leads.

Fluke 700G06 Pressure Calibrator: Accurate, fast, field-ready pressure measurement from ±10 inH2O to 10,000 psi with rugged IP67 design.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

Fluke 700G29 pressure gauge calibrator measures up to 3000 psi with 0.05% accuracy, offering rugged, IP67 performance for fast, precise field calibration.

Introducing the **Fluke Networks DSX2-8000-NW Versiv 2 Cable Analyzer 2 GHz Copper Certifier**, the ultimate tool for professional installers, technicians, and network engineers. Designed for exceptional performance with Cat 5e through Cat 8/Class I/II cables, this state-of-the-art analyzer ensures accurate copper cabling certification, significantly reducing troubleshooting time and simplifying project management. Key features include ultra-fast certification—completing full Cat 6A tests in just 8 seconds—along with the innovative ProjX™ Management System for seamless multi-team project handling and LinkWare™ Live cloud integration for real-time project oversight from anywhere. With high accuracy testing compliant with ANSI/TIA-1152 Level 2G and IEC 61935-1 Level VI standards, and detailed diagnostic capabilities, the DSX2-8000-NW guarantees quick fault isolation and superior reliability. Invest in your efficiency with the Fluke DSX2-8000-NW and ensure your network installations meet the highest standards. **In Stock Now!** *Estimated delivery: 2-4 weeks.*